Vehicle mirrors are one of the most important security features that you need to constantly make certain are functioning properly, because it is your safety, the safety of other road users and your finances because you can be fined if you have a defective mirror. This is the circumstance we will focus on on this page, you have endured a collision, one of your side mirrors is broken and you are now wondering how to change a side mirror on your Fiat Bravo 2? You are at the right place, we will describe all the steps to help you replace it in the right way. To begin, we’ll have a look at what attracts you in this article, how to change a complete side mirror on your Fiat Bravo 2, and then how to replace only the mirror glass.
How to replace a complete side mirror on my Fiat Bravo 2?
Let’s go, we commence this guide with the part that almost certainly appeal you the most, how to replace a side mirror on my Fiat Bravo 2? This process is quite simple and you should be competent to do it yourself with a minimum of tooling. You will just need to take off the plastic cover inside your car’s interior, it is usually clipped on the door. For power mirrors, make sure you unplug the power connector that you will see at the rear of the cover. At last, you will have to unscrew the screws that hold the mirror, generally there are three, a simple screwdriver should do just fine to enable you to complete this step of changing the side mirror of your Fiat Bravo 2. Make sure to keep the mirror on the outside of your vehicle when unscrewing the last screw, so that it does not fall out. Finally to install your new side mirror, you will just have to fit the new one in the 3 screw axes, screw it back in, reconnect the electricity if it is electric and to finish put back the plastic cover. That’s it, you’ve just discovered how to replace the side mirror of your Fiat Bravo 2, you see it wasn’t that difficult.
How do you just replace the window of the side mirror of my Fiat Bravo 2?
In case you just wish to replace the window of the side mirror of your Fiat Bravo 2, you will first of all need to identify the type of locking of your mirror. To achieve this, the least complicated methodology is to have a look at the fixing system on the replacement glass.
Side mirror glass replacing: tongue-locking glass
- If you wish to replace the side mirror glass of your Fiat Bravo 2 and it uses a tongue and groove system, you are lucky, it is the easiest system to take off. All you have to do is to use a plastic object to take off the window “by force”.
- To put it back in place, do the same and push it back in place with force. To check that it is well situated, move it around.
Side mirror glass replacing: metal spring locking glass
-
- With this locking system, to replace the side mirror glass of your Fiat Bravo 2 you will have to locate the locking spring, turn the glass in the opposite way to give you access to it, disassemble it.
- Make sure to keep the spring because it is possible that you have not one supplied it with your new window, change it on your new window, dismantle the old one paying attention to the electric cables in case there is defrosting system
.
- Go along with the positioning guide (notch) and gently push it into its housing so as not to break it. Verify that it is well situated by moving it around.
Side mirror glass replacing: swivel tray locking glass
-
- You can find the location of the swivel plate of the window to be changed on the side mirror of your Fiat Bravo 2, in most cases it is at the bottom behind the window
.
- Turn the glass in the opposite way to give you less complicated access to the device and using a screwdriver, rotate the system.
- If your mirror is built with a defrosting system, do the reverse operation to reattach it and check that it is well placed.
In the event that you have any additional questions about the Fiat Bravo 2, do not hesitate to consult our Fiat Bravo 2 category.
