Vehicle mirrors are one of the most essential safety features that you need to perpetually be sure are functioning correctly, because it is your safety, the safety of other motorists and your budget because you can be fined if you have a malfunctioning mirror. This is the case that interests us today, you have suffered a crash, one of your side mirrors is damaged and you are now wondering how to change a side mirror on your CUPRA FORMENTOR? You are at the right spot, we will outline all the procedures to help you change it in the correct way. To begin, we’ll consider what attracts you in this article, how to change a complete side mirror on your CUPRA FORMENTOR, and then how to change only the mirror glass.
How to change a complete side mirror on my CUPRA FORMENTOR?
Let’s go, we begin this guide with the part that likely interests you the most, how to change a side mirror on my CUPRA FORMENTOR? This operation is quite easy and you should be competent to do it yourself with a minimum amount of tooling. You will just need to take off the plastic cover inside your car’s interior, it is generally clipped on the door. For power mirrors, make sure unplug the power connector that you will see in back of the cover. At last, you will have to unscrew the screws that hold the mirror, in general there are three, a simple screwdriver should do the trick to allow you to complete this step of changing the side mirror of your CUPRA FORMENTOR. Make sure you keep the mirror on the outside of your car when unscrewing the last screw, so that it does not fall out. Finally to install your new side mirror, you will simply have to fit the new one in the 3 screw axes, screw it back in, reconnect the electricity if it is electric and to finish reposition the plastic cover. That’s it, you’ve just discovered how to change the side mirror of your CUPRA FORMENTOR, you see it wasn’t that complicated.
How do you just change the window of the side mirror of my CUPRA FORMENTOR?
If perhaps you simply want to change the window of the side mirror of your CUPRA FORMENTOR, you will initially need to discover the sort of locking of your mirror. To get this done, the most basic procedure is to examine the fixing system on the replacement glass.
Side mirror glass replacing: tongue-locking glass
- If you want to change the side mirror glass of your CUPRA FORMENTOR and it uses a tongue and groove system, you are fortunate people, it is the most simple system to take off. All you have to do is to use a plastic thing to take off the window “by force”.
- To reposition it, do the same thing and push it back in place with force. To verify that it is perfectly placed, move it around.
Side mirror glass replacing: metal spring locking glass
-
- With this locking system, to change the side mirror glass of your CUPRA FORMENTOR you will have to locate the locking spring, turn the glass in the opposite way to give you access to it, disassemble it.
- Make sure you keep the spring because it is possible that you have not one provided it with your new window, replace it on your new window, take apart the old one paying attention to the electric cables in the case of defrosting system
.
- Stick to the positioning guide (notch) and gently push it into its housing so as not to break it. Check that it is well placed by moving it around.
Side mirror glass replacing: swivel tray locking glass
-
- You can uncover the position of the swivel plate of the window to be changed on the side mirror of your CUPRA FORMENTOR, most of the time it is at the bottom behind the window
.
- Turn the glass in the opposite way to give you less complicated access to the device and using a screwdriver, rotate the system.
- If your mirror is equipped with a defrosting system, do the reverse procedure to reattach it and check that it is perfectly fixed.
In the event that you have any further questions about the CUPRA FORMENTOR, do not hesitate to consult our CUPRA FORMENTOR category.
