Vehicle mirrors are one of the most essential safety features that you have to always be sure are operating properly, because it is your safety, the safety of other road users and your budget because you can be fined if you have a malfunctioning side mirror. This is the circumstance we will focus on in this article, you have endured a collision, one of your mirrors is broken and you are now wondering how to change a side mirror on your Audi Q7? You are at the best place, we will outline all the steps to help you change it in the correct way. To begin, we’ll take a look at what attracts you on this site, how to change a complete side mirror on your Audi Q7, and then how to change only the mirror glass.
How to change a complete side mirror on my Audi Q7?
Let’s go, we begin this guide with the part that certainly concerns you the most, how to change a side mirror on my Audi Q7? This procedure is quite simple and you should be able to do it without help with a minimum of tooling. You will just need to take off the plastic cover inside your car’s interior, it is in most cases clipped on the door. For power mirrors, be sure to unplug the power connector that you will see at the rear of the cover. At last, you will have to unscrew the screws that hold the mirror, in most cases there are three, a simple screwdriver should do just fine to enable you to complete this step of changing the side mirror of your Audi Q7. Remember to keep the mirror on the outside of your vehicle when unscrewing the last screw, so that it does not fall out. At last to install your new side mirror, you will simply have to fit the new one in the 3 screw axes, screw it back in, reconnect the electricity if it is electric and finally reposition the plastic cover. That’s it, you’ve just discovered how to change the side mirror of your Audi Q7, you see it wasn’t that hard to do.
How do you just change the window of the side mirror of my Audi Q7?
If perhaps you simply wish to change the window of the side mirror of your Audi Q7, you will initially need to discern the type of locking of your mirror. To achieve this, the quickest strategy is to have a look at the fixing system on the replacement glass.
Side mirror glass replacing: tongue-locking glass
- If you wish to change the side mirror glass of your Audi Q7 and it uses a tongue and groove system, you are lucky, it is the least difficult system to take off. All you have to do is to use a plastic thing to take off the window “by force”.
- To put it back in place, do the same thing and push it back into place with force. To check that it is perfectly placed, move it around.
Side mirror glass replacing: metal spring locking glass
-
- With this locking system, to change the side mirror glass of your Audi Q7 you will need to find the locking spring, turn the glass in the opposite direction to give you access to it, disassemble it.
- Remember to keep the spring because it is possible that you have not one provided it with your new window, replace it on your new window, dismantle the old one paying attention to the electric cables in case of defrosting system
.
- Follow the positioning guide (notch) and smoothly push it into its housing so as not to break it. Examine that it is well placed by moving it around.
Side mirror glass replacing: swivel tray locking glass
-
- You can uncover the location of the swivel plate of the window to be changed on the side mirror of your Audi Q7, in most cases it is at the bottom behind the window
.
- Turn the glass in the opposite direction to give you less complicated access to the device and using a screwdriver, rotate the device.
- If your mirror is equipped with a defrosting system, do the reverse operation to reattach it and check that it is perfectly placed.
If you want more guides on the Audi Q7, go to our Audi Q7 category.
