Vehicle mirrors are one of the vital safety features that you need to constantly make certain are functioning properly, because it is your safety, the safety of other drivers and your budget because you can be fined if you have a malfunctioning mirror. This is the circumstance we will focus on today, you have experienced a crash, one of your side mirrors is damaged and you are now wondering how to change a side mirror on your Acura TSX? You are at the best place, we will detail all the methods to help you replace it properly. To begin, we’ll have a look at what attracts you here, how to change a complete side mirror on your Acura TSX, and then how to replace only the mirror glass.
How to replace a complete side mirror on my Acura TSX?
Let’s go, we begin this guidebook with the part that probably interests you the most, how to replace a side mirror on my Acura TSX? This process is fairly simple and you should be capable to do it on your own with a minimum amount of tooling. You will just need to take out the plastic cover inside your car’s cabin, it is in general clipped on the door. For power mirrors, remember to unplug the power connector that you will see in back of the cover. At last, you will have to unscrew the screws that hold the mirror, usually there are three, a simple screwdriver should do the trick to enable you to pass this step of changing the side mirror of your Acura TSX. Make sure you keep the mirror on the outside of your car when unscrewing the last screw, so that it does not drop out. Finally to install your new side mirror, you will simply have to fit the new one in the 3 screw axes, screw it back in, reconnect the electricity if it is electric and finally put back the plastic cover. That’s it, you’ve just learned how to replace the side mirror of your Acura TSX, you know now that it wasn’t that hard to do.
How do you just replace the window of the side mirror of my Acura TSX?
In case you only need to replace the window of the side mirror of your Acura TSX, you will first of all need to determine the sort of locking of your mirror. To get this done, the most basic methodology is to look at the fixing system on the replacement glass.
Side mirror glass replacing: tongue-locking glass
- If you need to replace the side mirror glass of your Acura TSX and it uses a tongue and groove system, you are lucky, it is the least difficult device to take out. All you have to do is to use a plastic thing to take out the window “by force”.
- To put it back in place, do the same and push it back right into place with force. To check that it is perfectly installed, move it around.
Side mirror glass replacing: metal spring locking glass
-
- With this locking system, to replace the side mirror glass of your Acura TSX you will have to find the locking spring, turn the glass in the opposite direction to give you access to it, disassemble it.
- Make sure you keep the spring because it is possible that you have not one included it with your new window, change it on your new window, take apart the old one paying attention to the electric cables in case there is defrosting system
.
- Follow the positioning guide (notch) and carefully push it into its housing so as not to break it. Check that it is well installed by moving it around.
Side mirror glass replacing: swivel tray locking glass
-
- You can locate the position of the swivel plate of the window to be changed on the side mirror of your Acura TSX, generally it is at the bottom behind the window
.
- Turn the glass in the opposite direction to give you easier access to the device and using a screwdriver, rotate the system.
- If your mirror is furnished with a defrosting system, do the reverse procedure to reattach it and check that it is perfectly placed.
In the event that you have any further questions about the Acura TSX, do not hesitate to consult our Acura TSX category.
