It’s almost never a good indicator that the engine in your Peugeot 2008 is behaving uncommonly. This is because the engine is the main component of your vehicle and any signal of abnormal running must be identified right away and you must look for the trigger of the malfunction. If it comes about that your Peugeot 2008 is hesitating during acceleration, we have done this tutorial to help you discover the trigger of your malfunction. We will now check out all the possible causes your Peugeot 2008 having hesitation in acceleration.
Peugeot 2008 WHICH hesitates while accelerating CAUSED BY THE IGNITION:
So let’s begin our list of the causes that can generate hesitation during Peugeot 2008 acceleration. One of the most basic causes is that your ignition does not work out. We speak about ignition, but we can also extend to the failure to the ECU which on its own can give bad info that will disturb your ignition. It’s likely that your Peugeot 2008 a has gone limp mode, don’t hesitate to examine this tutorial for more info. To be able to examine that one of these malfunctions is not the cause of your Peugeot 2008 having acceleration troubles, you will have to “suitcase” your vehicle. Also, you can examine the condition of your ignition coils, if you have more than one and one is defective it may be the explanation for the couplings, acceleration holes that you feel, if you only have one generally your Peugeot 2008 should not start.
Hesitation during Peugeot 2008 acceleration AS A RESULT OF THE INJECTORS:
Now let’s focus on the injector-related mishaps of your Peugeot 2008’s fuel injectors. If you detect this feeling that your vehicle is grazing, it is quite possible that due to poor fuel quality one or more of your injectors have become blocked or obstructed, causing a bad air/fuel mixture to be sent to the engine block and therefore automatically disturb its normal operation, do not fail to examine your injectors. If during the check you uncover that one of your injectors is leaking on your Peugeot 2008, please go through our small document to solve this malfunction.
Hesitation during Peugeot 2008 acceleration AS A RESULT OF THE ACCELERATOR CABLE:
Another possible explanation why you feel hesitation during Peugeot 2008 acceleration, whether you are driving, stationary, hot, cold or accelerating, is that your throttle cable is severely worn. If your accelerator cable is in a bad state of wear, it will not slide effectively in its sheath and will snap, examine the level of wear of your accelerator cable.
Peugeot 2008 that hesitates when accelerating CAUSED BY THE FUEL FILTER:
So far as the fuel filter is concerned, we’re struggling with the same kind of issue as clogged injectors. If your Peugeot 2008 is clutching and you feel like it is grazing or you have holes when accelerating, your fuel filter may be clogged. The result would be that your entire intake system would be running at idle and therefore your engine would lack fuel supply to go normally. Don’t miss to examine it and change it if needed. If you ever get the feeling that your Peugeot 2008 is going up in laps on its own, examine our tutorial it should help you to discern the source.
Hesitation during Peugeot 2008 acceleration AS A RESULT OF THE PARTICULATE FILTER:
The last reason for an hesitating Peugeot 2008 during acceleration. Modern cars are built with more and more options to limit emissions, the particulate filter is part of this package. On the other hand, in accordance with how you use it, it can become clogged and dirty. Specifically if you drive short distances and don’t push your engine hard oftentimes. If this is the case, it is possible that your ACP could become clogged and your Peugeot 2008 could give you acceleration complications. Have it tested.
Hesitation during Peugeot 2008 acceleration CAUSED BY A PUNCTURED HOSE:
To summarize, the last issue, and surely the least annoying for you, it is likely that one of your fuel or air intake hoses is punctured or cracked and that it causes a lack of air or fuel which will result in an Peugeot 2008 that gives acceleration troubles, examine under your hood, engine on, the level of wear of your hoses, be careful not to burn yourself. If this happens to you, your Peugeot 2008 may not be able to idle, in which case check out our little page to deal with the malfunction in depth.
If you have any additional questions about the Peugeot 2008, do not hesitate to consult our Peugeot 2008 category.
