It’s almost never a good signal that the engine in your Mitsubishi Pajero 3 is behaving uncommonly. This is because the engine is the main component of your vehicle and any indicator of abnormal working must be noticed straight away and you must search for the trigger of the malfunction. If it occurs that your Mitsubishi Pajero 3 is hesitating during acceleration, we have made this guide to help you find the trigger of your malfunction. We will now take a look at all the possible motives your Mitsubishi Pajero 3 having hesitation in acceleration.

hesitation-acceleration-mitsubishi-pajero-3

Mitsubishi Pajero 3 WHICH hesitates while accelerating BECAUSE OF THE IGNITION:

So let’s start our summarize of the motives that can provoke hesitation during Mitsubishi Pajero 3 acceleration. One of the most classic motives is that your ignition fails. We talk about ignition, but we can also extend to the malfunction to the ECU which by itself can transmit bad info that will disrupt your ignition. It’s possible that your Mitsubishi Pajero 3 a has gone limp mode, don’t think twice to read this guide for more information. In order to verify that one of these malfunctions is not the trigger of your Mitsubishi Pajero 3 having acceleration problems, you will have to “suitcase” your vehicle. Also, you can examine the condition of your ignition coils, if you have more than one and one is defective it may be the reason for the couplings, acceleration holes that you experience, if you only have one generally your Mitsubishi Pajero 3 should not start.

Hesitation during Mitsubishi Pajero 3 acceleration AS A RESULT OF THE INJECTORS:

Now let’s look into the injector-related mishaps of your Mitsubishi Pajero 3’s fuel injectors. If you detect this feeling that your vehicle is grazing, it is quite possible that due to poor fuel quality one or more of your injectors have become blocked or obstructed, leading to a bad air/fuel mixture to be delivered to the engine block and as a result automatically affect its normal operation, do not fail to verify your injectors. If during the test you find that one of your injectors is leaking on your Mitsubishi Pajero 3, please examine our small document to remedy this malfunction.

Hesitation during Mitsubishi Pajero 3 acceleration AS A RESULT OF THE ACCELERATOR CABLE:

Another possible reason why you experience hesitation during Mitsubishi Pajero 3 acceleration, whether you are driving, stationary, hot, cold or accelerating, is that your throttle cable is seriously worn. If your accelerator cable is in a severe state of wear, it will not slide effectively in its sheath and will snap, verify the level of wear of your accelerator cable.

Mitsubishi Pajero 3 that hesitates when accelerating BECAUSE OF THE FUEL FILTER:

As much as the fuel filter is concerned, we’re going through the same sort of problem as clogged injectors. If your Mitsubishi Pajero 3 is clutching and you experience like it is grazing or you have holes when accelerating, your fuel filter may be clogged. The consequence would be that your whole intake system would be running at idle and therefore your engine would lack fuel supply to go normally. Don’t forget to verify it and replace it if needed. If you ever get the feeling that your Mitsubishi Pajero 3 is going up in laps on its own, read our tutorial it should help you to find out the cause.

Hesitation during Mitsubishi Pajero 3 acceleration AS A RESULT OF THE PARTICULATE FILTER:

The ultimate explanation for an hesitating Mitsubishi Pajero 3 during acceleration. Modern cars are equipped with increasingly more options to limit emissions, the particulate filter is part of this package. However, based on how you use it, it can become clogged and dirty. Specifically if you drive short distances and don’t push your engine hard oftentimes. If this is the circumstance, it is possible that your ACP could become stopped up and your Mitsubishi Pajero 3 could give you acceleration problems. Have it tested.

Hesitation during Mitsubishi Pajero 3 acceleration BECAUSE OF A PUNCTURED HOSE:

In conclusion, the last problem, and surely the least annoying for you, it is possible that one of your fuel or air intake hoses is punctured or cracked and that it motives a lack of air or fuel which will result in an Mitsubishi Pajero 3 that gives acceleration troubles, verify under your hood, engine on, the level of wear of your hoses, be careful not to burn yourself. If this happens to you, your Mitsubishi Pajero 3 may not be able to idle, in which circumstance take a look at our little dossier to handle the malfunction in depth.

Whenever you have any additional questions about the Mitsubishi Pajero 3, do not hesitate to consult our Mitsubishi Pajero 3 category.