It’s rarely a good signal that the engine in your Jeep Wrangler is behaving uncommonly. This is because the engine is the fundamental component of your car and any sign of abnormal working must be identified as soon as possible and you must search for the trigger of the malfunction. If it comes about that your Jeep Wrangler is hesitating during acceleration, we have done this tutorial to help you uncover the trigger of your malfunction. We will now take a look at all the possible motives your Jeep Wrangler having hesitation in acceleration.


Jeep Wrangler WHICH hesitates while accelerating RESULTING FROM THE IGNITION:

So let’s commence our recap of the motives that can cause hesitation during Jeep Wrangler acceleration. One of the most basic motives is that your ignition fails. We speak about ignition, but we can also extend to the breakdown to the ECU which on its own can transmit bad info that will affect your ignition. It’s likely that your Jeep Wrangler a has gone limp mode, don’t hesitate to go through this tutorial for more information. In order to verify that one of these malfunctions is not the provoke of your Jeep Wrangler having acceleration difficulties, you will have to “suitcase” your car. Also, you can have a look at the state of your ignition coils, if you have more than one and one is defective it may be the cause for the couplings, acceleration holes that you perceive, if you only have one generally your Jeep Wrangler should not start.

Hesitation during Jeep Wrangler acceleration DUE TO THE INJECTORS:

Now let’s look into the injector-related mishaps of your Jeep Wrangler’s fuel injectors. If you notice this sense that your car is grazing, it is quite possible that due to poor fuel quality one or more of your injectors have become clogged or obstructed, leading to a bad air/fuel mixture to be sent to the engine block and consequently immediately disrupt its normal functions, do not fail to verify your injectors. If during the check you find that one of your injectors is leaking on your Jeep Wrangler, please examine our small file to solve this malfunction.

Hesitation during Jeep Wrangler acceleration DUE TO THE ACCELERATOR CABLE:

Another possible reason why you feel hesitation during Jeep Wrangler acceleration, whether you are driving, stationary, hot, cold or accelerating, is that your throttle cable is badly worn. If your accelerator cable is in a serious condition of wear, it will not slide correctly in its sheath and will snap, verify the level of wear of your accelerator cable.

Jeep Wrangler that hesitates when accelerating RESULTING FROM THE FUEL FILTER:

As far as the fuel filter is being considered, we’re struggling with the same form of trouble as clogged injectors. If your Jeep Wrangler is clutching and you feel like it is grazing or you have holes when accelerating, your fuel filter may be clogged. The outcome would be that your entire intake system would be running at idle and therefore your engine would lack fuel supply to go normally. Don’t miss to verify it and replace it if needed. If you ever get the feeling that your Jeep Wrangler is going up in laps by itself, go through our tutorial it should help you to find out the source.

Hesitation during Jeep Wrangler acceleration DUE TO THE PARTICULATE FILTER:

The ultimate justification for an hesitating Jeep Wrangler during acceleration. Modern cars are built with more and more options to limit emissions, the particulate filter is part of this package. On the other hand, depending on how you use it, it can become clogged and dirty. Specifically if you drive short distances and don’t push your engine hard oftentimes. If this is the case, it is possible that your ACP could become congested and your Jeep Wrangler could give you acceleration problems. Have it inspected.

Hesitation during Jeep Wrangler acceleration RESULTING FROM A PUNCTURED HOSE:

To summarize, the last trouble, and surely the least bothersome for you, it is likely that one of your fuel or air intake hoses is punctured or cracked and that it motives a lack of air or fuel which will result in an Jeep Wrangler that gives acceleration troubles, verify under your hood, engine on, the level of wear of your hoses, be careful not to burn yourself. If this happens to you, your Jeep Wrangler may not be able to idle, in which case take a look at our little page to fix the malfunction in depth.

To discover more tips on the Jeep Wrangler, take a look at the Jeep Wrangler category.