It’s hardly ever a good indicator that the engine in your Hyundai Bayon is behaving atypically. This is because the engine is the most important component of your car and any signal of abnormal functioning must be identified immediately and you must seek out the trigger of the failure. If it occurs that your Hyundai Bayon is hesitating during acceleration, we have done this tutorial to help you discover the trigger of your failure. We will now look into all the possible causes your Hyundai Bayon having hesitation in acceleration.

hesitation-acceleration-hyundai-bayon

Hyundai Bayon WHICH hesitates while accelerating RESULTING FROM THE IGNITION:

So let’s start our recap of the causes that can cause hesitation during Hyundai Bayon acceleration. One of the most classic causes is that your ignition fails. We talk about ignition, but we can also generalize the breakdown to the ECU which on its own can send bad information that will disturb your ignition. It’s likely that your Hyundai Bayon a has gone limp mode, don’t think twice to read this tutorial for more information. To be able to examine that one of these malfunctions is not the generate of your Hyundai Bayon having acceleration complications, you will have to “suitcase” your car. Also, you can take a look at the condition of your ignition coils, if you have more than one and one is faulty it may be the justification for the couplings, acceleration holes that you experience, if you only have one most of the time your Hyundai Bayon should not start.

Hesitation during Hyundai Bayon acceleration DUE TO THE INJECTORS:

Now let’s look into the injector-related mishaps of your Hyundai Bayon’s fuel injectors. If you notice this sense that your car is grazing, it is quite possible that due to poor fuel quality one or more of your injectors have become clogged or obstructed, generating a bad air/fuel mixture to be sent to the engine block and consequently instantly affect its normal functions, do not fail to examine your injectors. If during the check you uncover that one of your injectors is leaking on your Hyundai Bayon, please read our small file to solve this malfunction.

Hesitation during Hyundai Bayon acceleration DUE TO THE ACCELERATOR CABLE:

Another possible explanation why you come to feel hesitation during Hyundai Bayon acceleration, whether you are driving, stationary, hot, cold or accelerating, is that your throttle cable is seriously worn. If your accelerator cable is in a severe state of wear, it will not slide correctly in its sheath and will snap, examine the level of wear of your accelerator cable.

Hyundai Bayon that hesitates when accelerating RESULTING FROM THE FUEL FILTER:

As much as the fuel filter is being considered, we’re struggling with the same sort of problem as clogged injectors. If your Hyundai Bayon is clutching and you come to feel like it is grazing or you have holes when accelerating, your fuel filter may be stuck. The final result would be that your whole intake system would be running at idle and therefore your engine would lack fuel supply to go normally. Don’t miss to examine it and change it if needed. If you ever get the feeling that your Hyundai Bayon is going up in laps on its own, read our tutorial it should help you to distinguish the cause.

Hesitation during Hyundai Bayon acceleration DUE TO THE PARTICULATE FILTER:

The last justification for an hesitating Hyundai Bayon during acceleration. Modern cars are built with an increasing number of options to limit emissions, the particulate filter is part of this package. On the other hand, in accordance with how you use it, it can become clogged and dirty. Especially if you drive short distances and don’t push your engine hard oftentimes. If this is the case, it is possible that your ACP could become congested and your Hyundai Bayon could give you acceleration concerns. Have it checked.

Hesitation during Hyundai Bayon acceleration RESULTING FROM A PUNCTURED HOSE:

To summarize, the last problem, and surely the least irritating for you, it is likely that one of your fuel or air intake hoses is punctured or cracked and that it causes a lack of air or fuel which will result in an Hyundai Bayon that gives acceleration troubles, examine under your hood, engine on, the level of wear of your hoses, be careful not to burn yourself. If this happens to you, your Hyundai Bayon may not be able to idle, in which case look into our little dossier to deal with the malfunction in depth.

Whenever you have any additional questions about the Hyundai Bayon, do not hesitate to consult our Hyundai Bayon category.