It’s almost never a good sign that the engine in your Ford S-max 2 is behaving atypically. This is because the engine is the fundamental part of your car and any signal of abnormal functioning must be noticed right away and you must try to find the cause of the failure. If it comes about that your Ford S-max 2 is hesitating during acceleration, we have made this tutorial to help you locate the cause of your failure. We will now look into all the possible motives your Ford S-max 2 having hesitation in acceleration.

hesitation-acceleration-ford-s-max-2

Ford S-max 2 WHICH hesitates while accelerating DUE TO THE IGNITION:

So let’s start our list of the motives that can bring about hesitation during Ford S-max 2 acceleration. One of the most simple motives is that your ignition fails. We talk about ignition, but we can also extend to the malfunction to the ECU which by itself can transmit bad data that will disrupt your ignition. It’s possible that your Ford S-max 2 a has gone limp mode, don’t be reluctant to read this tutorial for more info. To be able to verify that one of these malfunctions is not the provoke of your Ford S-max 2 having acceleration troubles, you will have to “suitcase” your car. Also, you can take a look at the condition of your ignition coils, if you have more than one and one is defective it may be the motive for the couplings, acceleration holes that you feel, if you only have one most of the time your Ford S-max 2 should not start.

Hesitation during Ford S-max 2 acceleration BECAUSE OF THE INJECTORS:

Now let’s focus on the injector-related mishaps of your Ford S-max 2’s fuel injectors. If you identify this feeling that your car is grazing, it is quite possible that due to poor fuel quality one or more of your injectors have become blocked or obstructed, leading to a bad air/fuel mixture to be sent to the engine block and consequently immediately disturb its normal functions, do not miss to verify your injectors. If during the test you find that one of your injectors is leaking on your Ford S-max 2, please examine our small document to get rid of this malfunction.

Hesitation during Ford S-max 2 acceleration BECAUSE OF THE ACCELERATOR CABLE:

Another possible justification why you come to feel hesitation during Ford S-max 2 acceleration, whether you are driving, stationary, hot, cold or accelerating, is that your throttle cable is badly worn. If your accelerator cable is in a severe condition of wear, it will not slide properly in its sheath and will snap, verify the level of wear of your accelerator cable.

Ford S-max 2 that hesitates when accelerating DUE TO THE FUEL FILTER:

As far as the fuel filter is being considered, we’re going through the same sort of problem as clogged injectors. If your Ford S-max 2 is clutching and you come to feel like it is grazing or you have holes when accelerating, your fuel filter may be stuck. The outcome would be that your whole intake system would be running at idle and therefore your engine would lack fuel supply to go normally. Don’t miss to verify it and replace it if necessary. If you ever get the feeling that your Ford S-max 2 is going up in laps by itself, read our tutorial it should help you to find out the cause.

Hesitation during Ford S-max 2 acceleration BECAUSE OF THE PARTICULATE FILTER:

The last justification for an hesitating Ford S-max 2 during acceleration. Modern cars are equipped with an increasing number of options to limit emissions, the particulate filter is part of this package. On the other hand, depending on how you use it, it can become clogged and dirty. Specifically if you drive short distances and don’t push your engine hard oftentimes. If this is the case, it is possible that your ACP could become stopped up and your Ford S-max 2 could give you acceleration concerns. Have it checked out.

Hesitation during Ford S-max 2 acceleration DUE TO A PUNCTURED HOSE:

In conclusion, the last problem, and surely the least irritating for you, it is possible that one of your fuel or air intake hoses is punctured or cracked and that it motives a lack of air or fuel which will result in an Ford S-max 2 that gives acceleration troubles, verify under your hood, engine on, the level of wear of your hoses, be careful not to burn yourself. If this happens to you, your Ford S-max 2 may not be able to idle, in which case look into our little article to deal with the malfunction in depth.

To discover more tips on the Ford S-max 2, take a look at the Ford S-max 2 category.