It’s hardly ever a good indicator that the engine in your Ford Explorer is behaving uncommonly. This is because the engine is the main part of your vehicle and any indicator of abnormal functioning must be identified right away and you must seek out the trigger of the malfunction. If it happens that your Ford Explorer is hesitating during acceleration, we have made this guide to help you uncover the trigger of your malfunction. We will now look into all the possible causes your Ford Explorer having hesitation in acceleration.
Ford Explorer WHICH hesitates while accelerating BECAUSE OF THE IGNITION:
So let’s commence our recap of the causes that can provoke hesitation during Ford Explorer acceleration. One of the most simple causes is that your ignition fails. We speak about ignition, but we can also extend to the failure to the ECU which on its own can send bad data that will disrupt your ignition. It’s likely that your Ford Explorer a has gone limp mode, don’t think twice to read this guide for more info. To be able to verify that one of these malfunctions is not the trigger of your Ford Explorer having acceleration difficulties, you will have to “suitcase” your vehicle. Also, you can check out the state of your ignition coils, if you have more than one and one is faulty it may be the cause for the couplings, acceleration holes that you experience, if you only have one generally your Ford Explorer should not start.
Hesitation during Ford Explorer acceleration DUE TO THE INJECTORS:
Now let’s look into the injector-related mishaps of your Ford Explorer’s fuel injectors. If you perceive this sense that your vehicle is grazing, it is quite possible that due to poor fuel quality one or more of your injectors have become clogged or obstructed, leading to a bad air/fuel mixture to be delivered to the engine block and consequently automatically disrupt its normal functions, do not fail to verify your injectors. If during the test you uncover that one of your injectors is leaking on your Ford Explorer, please go through our small document to fix this malfunction.
Hesitation during Ford Explorer acceleration DUE TO THE ACCELERATOR CABLE:
Another possible reason why you feel hesitation during Ford Explorer acceleration, whether you are driving, stationary, hot, cold or accelerating, is that your throttle cable is severely worn. If your accelerator cable is in a severe state of wear, it will not slide correctly in its sheath and will snap, verify the level of wear of your accelerator cable.
Ford Explorer that hesitates when accelerating BECAUSE OF THE FUEL FILTER:
So far as the fuel filter is being considered, we’re going through the same sort of problem as clogged injectors. If your Ford Explorer is clutching and you feel like it is grazing or you have holes when accelerating, your fuel filter may be stuck. The outcome would be that your entire intake system would be running at idle and therefore your engine would lack fuel supply to go normally. Don’t forget to verify it and replace it if needed. If you ever get the feeling that your Ford Explorer is going up in laps on its own, read our tutorial it should help you to distinguish the cause.
Hesitation during Ford Explorer acceleration DUE TO THE PARTICULATE FILTER:
The ultimate explanation for an hesitating Ford Explorer during acceleration. Modern cars are equipped with an increasing number of options to limit emissions, the particulate filter is part of this package. On the other hand, based on how you use it, it can become clogged and dirty. Specifically if you drive short distances and don’t push your engine hard oftentimes. If this is the case, it is possible that your ACP could become stopped up and your Ford Explorer could give you acceleration problems. Have it examined.
Hesitation during Ford Explorer acceleration BECAUSE OF A PUNCTURED HOSE:
In conclusion, the last problem, and surely the least frustrating for you, it is likely that one of your fuel or air intake hoses is punctured or cracked and that it causes a lack of air or fuel which will result in an Ford Explorer that gives acceleration troubles, verify under your hood, engine on, the level of wear of your hoses, be careful not to burn yourself. If this happens to you, your Ford Explorer may not be able to idle, in which case look into our little dossier to fix the malfunction in depth.
To find more tips on the Ford Explorer, take a look at the Ford Explorer category.
