It’s almost never a good sign that the engine in your Chrysler Sebring is behaving atypically. This is because the engine is the main part of your car and any sign of abnormal functioning must be spotted as soon as possible and you must search for the trigger of the failure. If it happens that your Chrysler Sebring is hesitating during acceleration, we have done this article to help you locate the trigger of your failure. We will now look into all the possible causes your Chrysler Sebring having hesitation in acceleration.

hesitation-acceleration-chrysler-sebring

Chrysler Sebring WHICH hesitates while accelerating BECAUSE OF THE IGNITION:

So let’s begin our summarize of the causes that can cause hesitation during Chrysler Sebring acceleration. One of the most known causes is that your ignition fails. We talk about ignition, but we can also generalize the failure to the ECU which itself can transmit bad information that will disturb your ignition. It’s possible that your Chrysler Sebring a has gone limp mode, don’t be reluctant to browse this article for more information. To be able to examine that one of these malfunctions is not the cause of your Chrysler Sebring having acceleration troubles, you will have to “suitcase” your car. Also, you can take a look at the condition of your ignition coils, if you have more than one and one is faulty it may be the explanation for the couplings, acceleration holes that you perceive, if you only have one most of the time your Chrysler Sebring should not start.

Hesitation during Chrysler Sebring acceleration CAUSED BY THE INJECTORS:

Now let’s focus on the injector-related mishaps of your Chrysler Sebring’s fuel injectors. If you detect this sense that your car is grazing, it is quite possible that due to poor fuel quality one or more of your injectors have become clogged or obstructed, leading to a bad air/fuel mixture to be sent to the engine block and so automatically disturb its normal operation, do not fail to examine your injectors. If during the check you discover that one of your injectors is leaking on your Chrysler Sebring, please examine our small file to resolve this malfunction.

Hesitation during Chrysler Sebring acceleration CAUSED BY THE ACCELERATOR CABLE:

Another possible explanation why you come to feel hesitation during Chrysler Sebring acceleration, whether you are driving, stationary, hot, cold or accelerating, is that your throttle cable is seriously worn. If your accelerator cable is in a bad condition of wear, it will not slide effectively in its sheath and will snap, examine the level of wear of your accelerator cable.

Chrysler Sebring that hesitates when accelerating BECAUSE OF THE FUEL FILTER:

So far as the fuel filter is concerned, we’re dealing with the same kind of issue as clogged injectors. If your Chrysler Sebring is clutching and you come to feel like it is grazing or you have holes when accelerating, your fuel filter may be clogged. The final result would be that your whole intake system would be running at idle and therefore your engine would lack fuel supply to go normally. Don’t forget to examine it and change it if required. If you ever get the feeling that your Chrysler Sebring is going up in laps on its own, browse our tutorial it should help you to discern the source.

Hesitation during Chrysler Sebring acceleration CAUSED BY THE PARTICULATE FILTER:

The ultimate justification for an hesitating Chrysler Sebring during acceleration. Modern cars are equipped with an increasing number of options to limit emissions, the particulate filter is part of this package. Nevertheless, based on how you use it, it can become clogged and dirty. Specifically if you drive short distances and don’t push your engine hard very often. If this is the circumstance, it is possible that your ACP could become blocked and your Chrysler Sebring could give you acceleration complications. Have it inspected.

Hesitation during Chrysler Sebring acceleration BECAUSE OF A PUNCTURED HOSE:

To conclude, the last issue, and surely the least annoying for you, it is possible that one of your fuel or air intake hoses is punctured or cracked and that it causes a lack of air or fuel which will result in an Chrysler Sebring that gives acceleration troubles, examine under your hood, engine on, the level of wear of your hoses, be careful not to burn yourself. If this happens to you, your Chrysler Sebring may not be able to idle, in which circumstance look into our little dossier to handle the malfunction in depth.

Whenever you have any further questions about the Chrysler Sebring, do not hesitate to consult our Chrysler Sebring category.