Whether you have a new or old car, the desire to maintain it in good working order is the same. So when some thing goes wrong, we all tend to react the same way and worry about it. And, especially when it comes to the transmission, you can already picture yourself with a huge bill. If the gear shift of your Chrysler Town & Country shakes, you’ve come to the correct place, because in this content page we will try to wipe off your fears and explain firstly why the gear shift of your Chrysler Town & Country can vibrate, and secondly, what to do to get rid of this problem.
Why does the gearshift lever of my Chrysler Town & Country shake?
So let’s start this content page with the sources of a gear shift that shakes on Chrysler Town & Country, there are two different situations, here they are:
Gear Shift lever on Chrysler Town & Country shaking in neutral
To start with, it is possible that your gear shift knob shakes only when you are in neutral, or your clutch pedal is depressed, and when you accelerate this perception fades away. This is the most common case. The source of this problem is quite basic, very often it occurs on old automobiles or vehicles that have been driven a lot. In fact, with time, components including the suspensions or silent blocks are put under great strain and lose their intent as vibration reducers. In the event that the shift knob vibrates when starting or stopping on your Chrysler Town & Country, it is most certainly engine or gearbox silent blocks that are dead. In reality, their task is to limit and absorb all the couplings and shaking of the engine and gearbox. If these are broken, these vibrations will have repercussions on other auto parts such as the gear lever of your Chrysler Town & Country for example.
Gear Shift lever on Chrysler Town & Country which vibrates when accelerating
The second case of a speed lever that shakes a lot on Chrysler Town & Country and a little less common. In reality, in most situations, the rise in engine speed should blunt these tremors. If in your situation when you accelerate this shake does not decrease or worse, you will have to fix it more quickly. In reality, although more difficult to determine, there are some auto parts that may be responsible for the vibrations in the gear shift of your Chrysler Town & Country:
- Worn gearbox bearings, which triggers severe vibrations
- An anomalous play in the gimbals.
- An off-center clutch, or other components misaligned caused by an intervention on your engine
What if the gearshift lever on my Chrysler Town & Country shakes?
Now let’s proceed to the part you are probably most keen on, now that you have determined the origin of the gearshift that vibrates on your Chrysler Town & Country you’ll have to put things back to normal to get rid of it.
If you are in the case where it only vibrates at idle, it will be cheap to solve this problem. After checking which silent blocks were causing this vibration, you will have to either change the engine mounts or the gearbox mounts . This operation can be done even though you may not you have some tools and some basic mechanical experience.
To conclude, if you are in the case where your gear lever shakes when you accelerate with your Chrysler Town & Country, there is only one solution, which is to go to your technician. In reality, waiting is not a good solution because you risk harming other components, and, considering a precise and complete analysis without help is very complex. Your mechanic will be best able to get rid of your problem correctly.
If after examining or changing them you still have the impression that the engine of your Chrysler Town & Country is still shaking, do not hesitate to browse our content page on this subject to get rid of your problem.
To get more tips on the Chrysler Town & Country, take a look at the Chrysler Town & Country category.
