Regardless you have a new or old vehicle, the desire to keep it in good working order is the same. So when some thing does not go right, we all often behave the same way and worry about it. And, especially when it comes to the transmission, you can already picture yourself with a huge bill. If the gear shift of your Chrysler 300 shakes, you’ve come to the right web site, because in this content page we will try to eliminate your fears and show you in the beginning why the gear shift of your Chrysler 300 can vibrate, and secondly, what to do to remedy this problem.

gear-shift-vibrationschrysler-300

Why does the gearshift lever of my Chrysler 300 shake?

So let’s begin this content page with the sources of a gear shift that shakes on Chrysler 300, there are two different situations, here they are:

Gear Shift lever on Chrysler 300 shaking in neutral

To start with, it is likely that your gear shift knob shakes only when you are in neutral, or your clutch pedal is depressed, and when you accelerate this feeling disapear. This is the most basic case. The origin of this problem is quite simple, frequently it happens on old automobiles or vehicles that have been driven a lot. In reality, with time, parts including the suspensions or silent blocks are put under great stress and lose their function as vibration reducers. In the event that the shift knob vibrates when starting or stopping on your Chrysler 300, it is most likely engine or gearbox silent blocks that are dead. In reality, their purpose is to limit and absorb all the couplings and shaking of the engine and gearbox. If these are damaged, these vibrations will have repercussions on other components such as the gear lever of your Chrysler 300 for example.

Gear Shift lever on Chrysler 300 which vibrates when accelerating

The second case of a speed lever that shakes a lot on Chrysler 300 and a little less known. In reality, in most instances, the rise in engine speed should blunt these tremors. If in your circumstance when you accelerate this shake does not decrease or worse, you will have to resolve it more quickly. In actual fact, although difficult to establish, there are several components that may be responsible for the vibrations in the gear shift of your Chrysler 300:

  • Worn gearbox bearings, which triggers excessive vibrations
  • An anomalous play in the gimbals.
  • An off-center clutch, or other components out of allignment resulting from a repair on your engine

What if the gearshift lever on my Chrysler 300 shakes?

Now let’s proceed to the section you are likely most enthusiastic about, now that you have distinguished the source of the gearshift that vibrates on your Chrysler 300 you’ll have to put things back to normal to stop it.

If you are in the case where it only vibrates at idle, it will be cheap to repair this problem. After examining which silent blocks were causing this vibration, you will have to either replace the engine mounts or the gearbox mounts . This operation can be done even though you may not you have some tools and some basic mechanical experience.
To finish , if you are in the case where your gear lever shakes when you accelerate with your Chrysler 300, there is only one resolution, which is to go to your auto technician. In actual fact, waiting is not a good solution because you risk damaging other parts, and, considering a precise and complete analysis without help is very difficult. Your technician will be best able to remedy your problem correctly.
If after verifying or replacing them you still have the feeling that the engine of your Chrysler 300 is still shaking, do not hesitate to read our content page on this subject to remedy your problem.

To discover more tips on the Chrysler 300, take a look at the Chrysler 300 category.