Do you have the sense of a power drop without any rational explanation, and all this happens in an unforeseen or usual manner? Maybe it’s because your Ford Ecosport is going to limp mode . In fact, the security mode can be activated on a car for a number of reasons and the activation of this mode will set the engine’s behavior, sometimes causing a momentary or irreversible loss of power from your Ford Ecosport until you fix the problem. Our publishers wanted to write this guide so that you can fix this concern, which is very embarrassing and can be dangerous for you and the rest of the drivers. In order to resolve these problems, we will concentrate on the limp mode of your Ford Ecosport. And secondly, what are the reasons why your Ford Ecosport goes into security mode?


Ford Ecosport THAT GOES TO limp mode: WHAT IS IT?

Let’s start our article with the definition of your Ford Ecosport that goes to limp mode . You probably won’t have any information about the fact that this mode has been switched on and you will just feel the results. In most cases the clues of a safety mode on your Ford Ecosport will be that you will perceive an identifiable loss of power, you should not be able to exceed 3000 rpm which makes the use of your Ford Ecosport more than difficult. In addition to the power loss, you may have an amber warning light on your speedometer which will appear on the display to recommend that you go to your auto mechanic to handle the problem as fairly quickly as possible. In reality, via your vehicle’s ECU and the various sensors that continuously monitor the process of your engine, your Ford Ecosport that goes to safety is in reality a kind of electronic flange of your engine. Nevertheless, you must be serious about this fairly quickly because it probably hides a concern that needs to be handled, nevertheless, specifically with time, certain elements such as the EGR valve, the catalytic converter or the particle filter will become clogged and will age much more fairly quickly. In some situations, simply turning your Ford Ecosport off and on again will be enough to turn off the security mode, in other cases the original concern must be resolved to return to normal behaviour.

Why is my Ford Ecosport going into limp mode?

Now we’re going to detail the reasons why your Ford Ecosport is on limp mode. First of all you can easily verify whether this is the case by using your diagnostic plug and Ford Ecosportreading the fault codes of your Ford Ecosport. Please have a check out our specific content page which shows you how to use these tools and interpret the fault codes of your Ford Ecosport yourself. You should see a fault code displayed caused by an engine component. Based on the finish of your car the on-board computer will also tell you that you are in security mode. We will then see most of the parts that can produce your Ford Ecosport safe.

  • Turbo: A defective turbo will immediately alert your computer and produce your car safe.
  • The EGR valve: If your car is ever used in a really quiet technique or just for short trips at low speed, it will sometimes clog up and trigger the security mode to be activated.
  • The Particle Filter: A part famous for the complications it causes, in the event that your PAP is clogged, you will be subject to a safety shutdown of your Ford Ecosport just because your engine will not be able to properly exhaust the exhaust gases.
  • The flow meter: At last, the flow meter is the last of the known motives of an Ford Ecosport going into security. In fact, if it doesn’t control the air/fuel mixture properly, your ECU will know the problem instantly.

In case you have any other worries or questions about your car, you can certainly find the remedy in our Ford Ecosport Guide.

If you need more tutorials on the Ford Ecosport, go to our Ford Ecosport category.