Do you have the feeling of a power drop without any reasonable reason, and all this comes about in an unforeseen or usual way? Maybe it’s because your Fiat Punto is going to limp mode . In reality, the security mode can be activated on a car for a number of causes and the activation of this mode will set the engine’s behavior, often leading to a momentary or irreparable loss of power from your Fiat Punto until you handle the trouble. Our editors wanted to compose this guidebook so that you can deal with this matter, which is very embarrassing and can be dangerous for you and the rest of the drivers. In order to treat these concerns, we will focus on the limp mode of your Fiat Punto. And secondly, what are the causes why your Fiat Punto goes into security mode?
Fiat Punto THAT GOES TO limp mode: WHAT IS IT?
Let’s begin our article with the definition of your Fiat Punto that goes to limp mode . You probably won’t have any info about the fact that this mode has been turned on and you will simply feel the results. Usually the clues of a safety mode on your Fiat Punto will be that you will notice an identifiable loss of power, you should not have the ability to exceed 3000 rpm which makes the use of your Fiat Punto more than difficult. In addition to the power loss, you may have an amber warning light on your speedometer which will appear on the dash to suggest that you go to your auto technician to handle the trouble as fairly quickly as possible. In reality, via your vehicle’s ECU and the various sensors that constantly monitor the process of your engine, your Fiat Punto that goes to safety is in fact a sort of electronic flange of your engine. Nevertheless, you must be worried about this fairly quickly because it probably hides a concern that needs to be dealt with, nevertheless, especially with time, certain elements such as the EGR valve, the catalytic converter or the particle filter will become clogged and will age much more fairly quickly. In some circumstances, simply turning your Fiat Punto off and on again will be enough to turn off the security mode, in other situations the original concern must be fixed to return to normal behaviour.
Why is my Fiat Punto going into limp mode?
Now we’re going to detail the causes why your Fiat Punto is on limp mode. To begin with you can easily verify whether this is the case by using your diagnostic plug and Fiat Puntoreading the fault codes of your Fiat Punto. Please have a check out our specific article which shows you how to use these tools and translate the fault codes of your Fiat Punto yourself. You should see a fault code displayed caused by an engine component. Based on the finish of your car the on-board computer will also tell you that you are in security mode. We will then see most of the parts that can make your Fiat Punto safe.
- Turbo: A faulty turbo will automatically alert your computer and make your car safe.
- The EGR valve: If your car is ever used in a really quiet way or just for short trips at low speed, it will often clog up and trigger the security mode to be activated.
- The Particle Filter: A component famous for the complications it causes, in case your PAP is clogged, you will be subject to a safety shutdown of your Fiat Punto simply because your engine will not have the ability to effectively exhaust the exhaust gases.
- The flow meter: Finally, the flow meter is the last of the known motives of an Fiat Punto going into security. In fact, if it doesn’t manage the air/fuel mixture effectively, your ECU will know the problem instantly.
In case you have any other worries or questions about your car, you can certainly find the remedy in our Fiat Punto Guidebook.
In the event that you have any additional questions about the Fiat Punto, do not hesitate to consult our Fiat Punto category.
