Do you have the feeling of a power drop without any reasonable reason, and all this happens in an unpredictable or usual way? Maybe it’s because your Fiat Panda is going to limp mode . The fact is, the safety mode can be activated on a motor vehicle for a number of factors and the activation of this mode will set the engine’s behavior, sometimes leading to a momentary or irreversible loss of power from your Fiat Panda until you handle the problem. Our publishers wanted to write this guide so that you can handle this concern, which is very embarrassing and can be dangerous for you and the rest of the drivers. In order to solve these concerns, we will concentrate on the limp mode of your Fiat Panda. And secondly, what are the factors why your Fiat Panda goes into safety mode?

limp-mode-fiat-panda

Fiat Panda THAT GOES TO limp mode: WHAT IS IT?

Let’s start our content with the definition of your Fiat Panda that goes to limp mode . You almost certainly won’t have any info about the fact that this mode has been turned on and you will simply feel the consequences. Usually the clues of a safety mode on your Fiat Panda will be that you will notice an identifiable loss of power, you should not have the ability to exceed 3000 rpm which makes the use of your Fiat Panda more than complicated. Furthermore to the power loss, you may have an amber warning light on your speedometer which will appear on the display to advise that you go to your mechanic to handle the problem as fairly quickly as possible. In reality, via your vehicle’s ECU and the various sensors that continuously monitor the procedure of your engine, your Fiat Panda that goes to security is in reality a kind of electronic flange of your engine. On the other hand, you must be serious about this fairly quickly because it almost certainly hides a concern that needs to be dealt with, nevertheless, especially with time, certain elements such as the EGR valve, the catalytic converter or the particle filter will become clogged and will age much more fairly quickly. In some circumstances, simply turning your Fiat Panda off and on again will be enough to turn off the safety mode, in other situations the original concern must be fixed to return to normal behaviour.

Why is my Fiat Panda going into limp mode?

Now we’re going to highlight the factors why your Fiat Panda is on limp mode. First of all you can easily verify if this is the circumstance by using your diagnostic plug and Fiat Pandareading the fault codes of your Fiat Panda. Please have a check out our dedicated content page which teaches you how to use these tools and translate the fault codes of your Fiat Panda yourself. You should discover a fault code displayed because of an engine component. Based on the finish of your motor vehicle the on-board computer will as well tell you that you are in safety mode. We will then discover most of the parts that can produce your Fiat Panda safe.

  • Turbo: A defective turbo will automatically inform your computer and produce your motor vehicle safe.
  • The EGR valve: If your vehicle is ever used in a really quiet way or just for short trips at low speed, it will sometimes clog up and trigger the safety mode to be activated.
  • The Particle Filter: A component famous for the problems it triggers, in the event that your PAP is clogged, you will be subject to a safety shutdown of your Fiat Panda simply because your engine will not have the ability to properly exhaust the exhaust gases.
  • The flow meter: Finally, the flow meter is the last of the established motives of an Fiat Panda going into safety. In fact, if it doesn’t control the air/fuel mixture properly, your ECU will know the problem instantly.

In the event that you have any other worries or questions about your motor vehicle, you can certainly locate the solution in our Fiat Panda Guidebook.

If you need more tutorials on the Fiat Panda, go to our Fiat Panda category.