Do you have the sense of a power drop without any reasonable reason, and all this happens in an unforeseen or usual way? Maybe it’s because your Fiat Doblo is going to limp mode . In fact, the safety mode can be activated on a motor vehicle for a number of reasons and the activation of this mode will set the engine’s performance, occasionally causing a momentary or irreversible loss of power from your Fiat Doblo until you deal with the trouble. Our editors wanted to write this guide so that you can handle this matter, which is very embarrassing and can be dangerous for you and the rest of the drivers. In order to treat these concerns, we will focus on the limp mode of your Fiat Doblo. And secondly, what are the reasons why your Fiat Doblo goes into safety mode?

limp-mode-fiat-doblo

Fiat Doblo THAT GOES TO limp mode: WHAT IS IT?

Let’s begin our article with the definition of your Fiat Doblo that goes to limp mode . You probably won’t have any information about the fact that this mode has been switched on and you will just experience the consequences. In most cases the clues of a safety mode on your Fiat Doblo will be that you will detect an identifiable loss of power, you should not be able to exceed 3000 rpm which makes the use of your Fiat Doblo more than complicated. In addition to the power loss, you may have an amber warning light on your speedometer which will appear on the dash to advise that you go to your technician to handle the trouble as quickly as possible. In reality, via your vehicle’s ECU and the various sensors that constantly monitor the operation of your engine, your Fiat Doblo that goes to safety is in reality a kind of electronic flange of your engine. On the other hand, you must be serious about this quickly because it probably hides a concern that needs to be handled, nevertheless, specifically with time, certain elements such as the EGR valve, the catalytic converter or the particle filter will become clogged and will age much more quickly. In some circumstances, simply turning your Fiat Doblo off and on again will be enough to turn off the safety mode, in other situations the original concern must be solved to return to regular behaviour.

Why is my Fiat Doblo going into limp mode?

Now we’re going to highlight the reasons why your Fiat Doblo is on limp mode. To begin with you can easily verify whether this is the circumstance by using your diagnostic plug and Fiat Dobloreading the fault codes of your Fiat Doblo. Please have a look at our dedicated article which explains you how to use these tools and interpret the fault codes of your Fiat Doblo yourself. You should discover a fault code displayed caused by an engine component. Based on the finish of your motor vehicle the on-board computer will as well tell you that you are in safety mode. We will then see most of the parts that can make your Fiat Doblo safe.

  • Turbo: A faulty turbo will immediately notify your computer and make your motor vehicle safe.
  • The EGR valve: If your vehicle is ever used in a really quiet way or just for short trips at low speed, it will occasionally clog up and bring about the safety mode to be activated.
  • The Particle Filter: A component famous for the complications it triggers, in the event that your PAP is clogged, you will be subject to a safety shutdown of your Fiat Doblo just because your engine will not be able to properly exhaust the exhaust gases.
  • The flow meter: At last, the flow meter is the last of the established motives of an Fiat Doblo going into safety. In fact, if it doesn’t control the air/fuel mixture properly, your ECU will know the problem instantly.

In case you have any other worries or questions about your motor vehicle, you can certainly locate the remedy in our Fiat Doblo Guide.

If you want more guides on the Fiat Doblo, go to our Fiat Doblo category.