Do you have the feeling of a power drop without any rational reason, and all this happens in an unforeseen or usual way? Maybe it’s because your Fiat Bravo 2 is going to limp mode . In fact, the security mode can be activated on a motor vehicle for a number of causes and the activation of this mode will set the engine’s performance, sometimes causing a momentary or irreparable loss of power from your Fiat Bravo 2 until you solve the issue. Our publishers wanted to write this guide so that you can handle this matter, which is very embarrassing and can be dangerous for you and the rest of the car owners. In order to resolve these concerns, we will focus on the limp mode of your Fiat Bravo 2. And secondly, what are the causes why your Fiat Bravo 2 goes into security mode?

limp-mode-fiat-bravo-2

Fiat Bravo 2 THAT GOES TO limp mode: WHAT IS IT?

Let’s start our article with the definition of your Fiat Bravo 2 that goes to limp mode . You probably won’t have any info about the fact that this mode has been turned on and you will just experience the results. Usually the clues of a safety mode on your Fiat Bravo 2 will be that you will notice an identifiable loss of power, you should not have the ability to exceed 3000 rpm which makes the use of your Fiat Bravo 2 more than difficult. In addition to the power loss, you may have an amber warning light on your speedometer which will appear on the display to advise that you go to your auto technician to handle the issue as fairly quickly as possible. In fact, via your vehicle’s ECU and the various sensors that continuously monitor the operation of your engine, your Fiat Bravo 2 that goes to security is in fact a kind of electronic flange of your engine. On the other hand, you must be worried about this fairly quickly because it probably hides a concern that needs to be dealt with, however, especially with time, certain components such as the EGR valve, the catalytic converter or the particle filter will become clogged and will age much more fairly quickly. In some situations, simply turning your Fiat Bravo 2 off and on again will be enough to turn off the security mode, in other cases the original concern must be solved to return to regular behaviour.

Why is my Fiat Bravo 2 going into limp mode?

Now we’re going to highlight the causes why your Fiat Bravo 2 is on limp mode. To begin with you can easily verify if this is the case by using your diagnostic plug and Fiat Bravo 2reading the fault codes of your Fiat Bravo 2. Please have a look at our dedicated article which shows you how to use these tools and translate the fault codes of your Fiat Bravo 2 yourself. You should discover a fault code displayed due to an engine component. Based on the finish of your motor vehicle the on-board computer will also tell you that you are in security mode. We will then discover most of the parts that can make your Fiat Bravo 2 safe.

  • Turbo: A defective turbo will immediately notify your computer and make your motor vehicle safe.
  • The EGR valve: If your vehicle is ever used in a really quiet technique or just for short trips at low speed, it will sometimes clog up and trigger the security mode to be activated.
  • The Particle Filter: A part famous for the complications it causes, in case your PAP is clogged, you will be subject to a safety shutdown of your Fiat Bravo 2 just because your engine will not have the ability to properly exhaust the exhaust gases.
  • The flow meter: At last, the flow meter is the last of the established causes of an Fiat Bravo 2 going into security. In fact, if it doesn’t manage the air/fuel mixture properly, your ECU will know the problem instantly.

In case you have any other worries or questions about your motor vehicle, you can certainly discover the solution in our Fiat Bravo 2 Guide.

If you have any further questions about the Fiat Bravo 2, do not hesitate to consult our Fiat Bravo 2 category.