Do you have the perception of a power drop without any logical explanation, and all this happens in an unpredictable or usual way? Maybe it’s because your Fiat 500 is going to limp mode . In reality, the security mode can be activated on a motor vehicle for a number of reasons and the activation of this mode will set the engine’s performance, sometimes leading to a momentary or irreversible loss of power from your Fiat 500 until you handle the trouble. Our publishers wanted to write this guidebook so that you can handle this matter, which is very embarrassing and can be dangerous for you and the rest of the drivers. In order to treat these problems, we will concentrate on the limp mode of your Fiat 500. And secondly, what are the reasons why your Fiat 500 goes into security mode?
Fiat 500 THAT GOES TO limp mode: WHAT IS IT?
Let’s begin our content page with the definition of your Fiat 500 that goes to limp mode . You most likely won’t have any info about the fact that this mode has been switched on and you will just feel the results. Usually the clues of a safety mode on your Fiat 500 will be that you will identify an identifiable loss of power, you should not have the ability to exceed 3000 rpm which makes the use of your Fiat 500 more than difficult. In addition to the power loss, you may have an amber warning light on your speedometer which will appear on the screen to recommend that you go to your auto technician to handle the trouble as fairly quickly as possible. In reality, via your vehicle’s ECU and the various sensors that constantly monitor the procedure of your engine unit, your Fiat 500 that goes to security is in fact a kind of electronic flange of your engine unit. However, you must be serious about this fairly quickly because it most likely hides a concern that needs to be dealt with, nevertheless, especially over time, certain components such as the EGR valve, the catalytic converter or the particle filter will become clogged and will age much more fairly quickly. In some circumstances, simply turning your Fiat 500 off and on again will be enough to turn off the security mode, in other situations the original concern must be fixed to return to normal behaviour.
Why is my Fiat 500 going into limp mode?
Now we’re going to outline the reasons why your Fiat 500 is on limp mode. First of all you can easily check whether this is the case by using your diagnostic plug and Fiat 500reading the fault codes of your Fiat 500. Please have a look at our dedicated content page which teaches you how to use these tools and translate the fault codes of your Fiat 500 yourself. You should find out a fault code displayed due to an engine unit component. Based on the finish of your motor vehicle the on-board computer will also tell you that you are in security mode. We will then see most of the parts that can make your Fiat 500 safe.
- Turbo: A defective turbo will immediately alert your computer and make your motor vehicle safe.
- The EGR valve: If your vehicle is ever used in a really quiet way or just for short trips at low speed, it will sometimes clog up and trigger the security mode to be activated.
- The Particle Filter: A part famous for the complications it triggers, in case your PAP is clogged, you will be subject to a safety shutdown of your Fiat 500 just because your engine will not have the ability to properly exhaust the exhaust gases.
- The flow meter: Finally, the flow meter is the last of the established causes of an Fiat 500 going into security. In fact, if it doesn’t control the air/fuel mixture properly, your ECU will know the problem instantly.
In the event you have any other worries or questions about your motor vehicle, you can certainly find the solution in our Fiat 500 Guide.
To get more tips on the Fiat 500, take a look at the Fiat 500 category.
