The engine of your car is sophisticated, it is not always easy to understand all the signs it sends us. However, it is totally necessary to try to stay on alert for the slightest indication of weakness in your vehicle to limit the risk of serious problems. If you have the sense that your clutch is slipping on your Subaru Crosstrek, you’re right to have started researching. It’s a defect that must be taken into account rather quickly, otherwise you could end up with an unusable vehicle. To help you in your approach our team has chose to compose this guide which should allow you to see more clearly and make the right decisions to avoid aggravating the issue and make sure that it is indeed the trouble you are victim of. To get this done, we will first look at what a slipping clutch on Subaru Crosstrek is and how to verify that this is what is occurring to you, and then, what steps can be taken to resolve the issue.
What is slipping clutch on Subaru Crosstrek and how to spot it?
A Subaru Crosstrek with a clutch that slips
The clutch of your Subaru Crosstrek is the component that enables your automobile to change gears. It is located between your gearbox and your engine. It is the component that comes into contact with the flywheel which is located on the engine side and which will receive the power transmitted by the clutch. With wear, the clutch of your Subaru Crosstrek slips because it is made up of notches that engage in the flywheel, and with wear and friction it wears out. It is said that the clutch slips when its teeth are too damaged for it to engage on the flywheel.
How to spot clutch slipping on an Subaru Crosstrek?
There are many methods to find out that the clutch of your Subaru Crosstrek is slipping. You can accomplish all of these tests on your own.
You can simply find out that your clutch slips when you accelerate and your engine revs up, but your car does not speed up, you may as well encounter a burning smell.
To verify the first observation, you can stop, pull the parking brake, engage the first gear, accelerate reasonably by releasing the clutch of your vehicle carefully, in the event that your engine motor rises in revs but the Subaru Crosstrek is still fixed it is the indication of a dead clutch.
Finally, you can put yourself, still in third gear, with the handbrake on, and by releasing it, your vehicle should stall, if not, your clutch is almost certainly dead.
What should I do when my clutch slips on my Subaru Crosstrek?
Limit the wear of your Subaru Crosstrek clutch
We will at this point give you some recommendations to limit the wear of your clutch and avoid your clutch slipping on your Subaru Crosstrek. First of all, it is good not to leave your foot on the clutch pedal, regardless if the pressure you apply is very mild you will pre wear the clutch release bearing which will eventually lead to a full change of the clutch kit. An additional point not to be missed, do not over-accelerate when you start your car, your acceleration must permanently be adapted to the speed of your engine motor. If you are at a standstill accelerate slowly, if you are at medium speed accelerate gradually when you release the clutch pedal of your car so as not to make it slip against your engine flywheel.
Replacing your Subaru Crosstrek clutch
At last, in this last part, we will talk about the repair part. In case the clutch of your Subaru Crosstrek is useless, you may possibly be stuck at a standstill and have no other solution than to call the tow truck, because a dead clutch no longer allows the transmission to transmit power to the wheels. If this is the case, take note that you will have to replace the complete clutch kit, this repair necessitates quite a few hours of work and is approximated to cost between 500 and 1200 euros according to the engine and the workshop.
If you need more guides on the Subaru Crosstrek, go to our Subaru Crosstrek category.
