The engine of your car is elaborate, it is not always easy to read all the signals it sends us. On the other hand, it is absolutely necessary to try to stay on alert for the slightest indication of weakness in your automobile to limit the risk of serious complications. If you have the impression that your clutch is slipping on your Mitsubishi Lancer, you’re right to have started looking into it. It’s a defect that must be taken into account rather quickly, otherwise you could end up with an unusable automobile. To help you in your way our team has decided to compose this article which should allow you to see more clearly and make the right decisions to avoid aggravating the problem and ensure that it is indeed the trouble you are victim of. To get this done, we will first check out what a slipping clutch on Mitsubishi Lancer is and how to verify that this is what is occurring to you, and then, what measures can be taken to solve the problem.
What is slipping clutch on Mitsubishi Lancer and how to identify it?
A Mitsubishi Lancer with a clutch that slips
The clutch of your Mitsubishi Lancer is the part that permits your vehicle to shift gears. It is placed between your gearbox and your engine. It is the part that comes into contact with the flywheel which is located on the engine side and which will collect the power transmitted by the clutch. With wear, the clutch of your Mitsubishi Lancer slips because it is made up of notches that engage in the flywheel, and with wear and friction it wears out. It is said that the clutch slips when its teeth are too worn for it to engage on the flywheel.
How to identify clutch slipping on an Mitsubishi Lancer?
There are some techniques to find out that the clutch of your Mitsubishi Lancer is slipping. You can conduct all of these checks without any help.
You can simply find out that your clutch slips when you accelerate and your engine revs up, but your car does not speed up, you may also experience a burning smell.
To validate the first observation, you can stop, pull the parking brake, engage the first gear, accelerate reasonably by releasing the clutch of your vehicle gently, if it turns out your engine unit rises in revs but the Mitsubishi Lancer remains fixed it is the indication of a dead clutch.
Finally, you can put yourself, still in third gear, with the handbrake on, and by releasing it, your automobile should stall, if not, your clutch is almost certainly dead.
What should I do if my clutch slips on my Mitsubishi Lancer?
Limit the wear of your Mitsubishi Lancer clutch
We will now give you some recommendations to limit the wear of your clutch and avoid your clutch slipping on your Mitsubishi Lancer. To begin with, it is good not to leave your foot on the clutch pedal, regardless if the pressure you apply is very mild you will pre wear the clutch release bearing which will eventually produce a total change of the clutch kit. Another point not to be neglected, do not over-accelerate when you start your car, your acceleration must permanently be adapted to the speed of your engine unit. In the event that you are at a standstill accelerate slowly, if you are at medium speed accelerate gradually when you release the clutch pedal of your car so as not to make it slip against your engine flywheel.
Replacing your Mitsubishi Lancer clutch
At last, in this last portion, we will address the repair part. In circumstance the clutch of your Mitsubishi Lancer is useless, you may be stuck at a standstill and have no other solution than to phone the tow truck, because a dead clutch no longer allows the transmission to transfer power to the wheels. If this is the circumstance, be aware that you will have to change the complete clutch kit, this repair requires quite a few hours of work and is estimated to cost between 500 and 1200 euros based on the engine and the workshop.
To discover more tips on the Mitsubishi Lancer, take a look at the Mitsubishi Lancer category.
