The engine of your car is complex, it is not always easy to understand all the symptoms it sends us. However, it is totally important to try to stay on alert for the slightest symptom of weakness in your car to limit the risk of serious problems. If you have the sense that your clutch is slipping on your Hyundai Kona, you’re right to have started looking into it. It’s a defect that must be taken into account fairly quickly, otherwise you could end up with an useless car. To help you in your approach our team has chose to compose this article which should allow you to see more clearly and make the right decisions to avoid aggravating the problem and make sure that it is indeed the trouble you are victim of. To do this, we will first take a look at what a slipping clutch on Hyundai Kona is and how to check that this is what is occurring to you, and then, what measures can be taken to correct the problem.

clutch-slipping-hyundai-kona

What is slipping clutch on Hyundai Kona and how to spot it?

A Hyundai Kona with a clutch that slips

The clutch of your Hyundai Kona is the part that enables your vehicle to shift gears. It is located between your gearbox and your engine. It is the part that comes into contact with the flywheel which is located on the engine side and which will collect the power transmitted by the clutch. With wear, the clutch of your Hyundai Kona slips because it is made up of notches that engage in the flywheel, and with wear and friction it wears out. It is said that the clutch slips when its teeth are too damaged for it to engage on the flywheel.

How to spot clutch slipping on an Hyundai Kona?

There are many solutions to identify that the clutch of your Hyundai Kona is slipping. You can conduct all of these tests without any help.
You can simply identify that your clutch slips when you accelerate and your engine revs up, but your car does not speed up, you may as well encounter a burning smell.
To verify the first observation, you can stop, pull the parking brake, engage the first gear, accelerate moderately by releasing the clutch of your vehicle delicately, if your engine rises in revs but the Hyundai Kona remains fixed it is the symptom of a dead clutch.
Finally, you can put yourself, still in third gear, with the handbrake on, and by releasing it, your car should stall, if not, your clutch is probably dead.

What should I do when ever my clutch slips on my Hyundai Kona?

Some advices to avoir the wear of your Hyundai Kona clutch

We will at this point give you some ideas to limit the wear of your clutch and avoid your clutch slipping on your Hyundai Kona. To begin with, it is wise not to leave your foot on the clutch pedal, regardless if the pressure you apply is very light you will pre wear the clutch release bearing which will eventually end up in a full change of the clutch kit. An additional point not to be omitted, do not over-accelerate when you start, your acceleration must permanently be adapted to the velocity of your engine. If you are at a standstill accelerate slowly, if you are at medium speed accelerate gradually when you release the clutch pedal of your car so as not to make it slip against your engine flywheel.

Replacing your Hyundai Kona clutch

Finally, in this last part, we will talk about the repair part. In circumstance the clutch of your Hyundai Kona is useless, you may be stuck at a standstill and have no other alternative than to contact the tow truck, because a dead clutch no longer allows the transmission to transfer power to the wheels. If this is the circumstance, take note that you will have to change the complete clutch kit, this repair requires quite a few hours of work and is approximated to cost between 500 and 1200 euros according to the engine and the garage.

If you have any additional questions about the Hyundai Kona, do not hesitate to consult our Hyundai Kona category.