Certain auto parts of your motor vehicle are fundamental to its correct operation, and to go further, necessary to your safety and that of other users. Your braking system is one of them, and if there’s one thing that must be in good functioning conditions, it’s this one. When you begin to have brake complications you need to handle it right away, that’s why our team has posted this article content on brake fluid leaks on Mazda 6 to help you resolve this difficulty in the right method and fix it quickly. To accomplish this, we will first discover the purpose of brake fluid, then, what triggers a brake fluid leak on your Mazda 6 , and at last, how to remedy such a leak.
What is the purpose of brake fluid on a Mazda 6?
So we begin our article by quickly detailing the purpose of this famous brake fluid in the braking system of your Mazda 6. To understand, a brake system works with a closed hydraulic circuit, that is to say that you will have rigid hoses filled with brake fluid that are pressurized by the master cylinder, and when you press your brake pedal, your brake fluid will be compressed and will actuate your brake calipers so that they pinch the brake pads on your discs. It is therefore vital that you constantly have the right level of brake fluid on your Mazda 6, if you don’t know how to carry out this manipulation, seek advice from our article on this subject.
Motives of a brake fluid leak on your Mazda 6
We now proceed to a more important part to help you understand why you have a brake fluid leak on your Mazda 6 .
What triggers a brake fluid leak on a Mazda 6?
First, we’ll show you the different possible sources of the leak of your Mazda 6. Here are the ones down below:
- A damaged brake hose: It’s one of the most general causes, one of the brake hoses has been cut and you lose brake fluid and pressure through this hole.
- A defective master cylinder on Mazda 6 can lead to leaks on its different entries or exits.
- Most of the time this occurs when a brake drain has been performed not too long ago, and it is quite often not tightened correctly.
- Wheel cylinder: Just present on drum brakes, this part can leak and trigger an imbalance in the braking.
How to detect a brake fluid leak on Mazda 6?
We will now give you the different suggestions and signs of illness to interpret to check that you have a brake fluid leak on your Mazda 6 , find them down below:
- If the ABS warning light of your Mazda 6 is on , you have to check immediately the state of your circuit, do not hesitate to seek advice from our dedicated article to have all the procedures to carry out.
- If your Mazda 6 pulls to the left or right when you brake you may possibly have a brake fluid leak.
- This is one of the most noticeable indications, if you experience that your pedal is much less difficult to press down and goes up more slowly, it is very likely that you have a loss of pressure in your brake system.
- More obvious, but if you find brake fluid on one of these elements you are bound to have a leak since this circuit is supposed to be closed.
How to resolve a brake fluid leak on Mazda 6?
The only remedy when you experience a brake fluid leak on your Mazda 6 is to go to your garage area. If it is light, check your level and drive carefully to the garage area, if it is too big don’t drive and have your motor vehicle towed. A general breakdown of your brake system will lead to an accident. You can, however, make a few regular checks to limit the risks:
- check the brake fluid level repeatedly.
- Purge your brakes every two years or 40, 000 miles.
- Change the brake fluid if you experience the brakes on your Mazda 6 become “soft”.
In the event that you have any further questions about the Mazda 6, do not hesitate to consult our Mazda 6 category.
