Certain parts of your car are essential to its correct operation, and to go further more, important to your security and that of other users. Your braking system is one of them, and if there’s one thing that must be in good working order, it’s this one. When you start to have brake problems you need to handle it right away, that’s why our team has written this article on brake fluid leaks on Jeep Wrangler to help you address this difficulty in the right way and fix it fairly quickly. To do this, we will first see the function of brake fluid, then, what causes a brake fluid leak on your Jeep Wrangler , and at last, how to fix such a leak.
What is the function of brake fluid on a Jeep Wrangler?
So we start our content by fairly quickly telling you the function of this famous brake fluid in the braking system of your Jeep Wrangler. To understand, a brake system operates with a closed hydraulic circuit, that is to say that you will have rigid hoses filled with brake fluid that are pressurized by the master cylinder, and when you press your brake pedal, your brake fluid will be pressurized and will actuate your brake calipers so that they pinch the brake pads on your discs. It is consequently essential that you always have the right level of brake fluid on your Jeep Wrangler, if you don’t know how to perform this manipulation, seek advice from our content on this subject.
Causes of a brake fluid leak on your Jeep Wrangler
We now move on to a more necessary component to help you understand why you have a brake fluid leak on your Jeep Wrangler .
What causes a brake fluid leak on a Jeep Wrangler?
First, we’ll show you the different possible origins of the leak of your Jeep Wrangler. Here are the ones below:
- A broken brake hose: It’s one of the most basic causes, one of the brake hoses has been cut and you lose brake fluid and pressure through this hole.
- A defective master cylinder on Jeep Wrangler can result in leaks on its different entries or exits.
- In most cases this occurs when a brake drain has been done not too long ago, and it is quite often not tightened properly.
- Wheel cylinder: Just present on drum brakes, this component can leak and trigger an imbalance in the braking.
How to notice a brake fluid leak on Jeep Wrangler?
We will now give you the different tips and signs of illness to interpret to check that you have a brake fluid leak on your Jeep Wrangler , find them below:
- If the ABS warning light of your Jeep Wrangler is on , you have to check straight the state of your circuit, do not think twice to seek advice from our dedicated content to have all the procedures to perform.
- If your Jeep Wrangler pulls to the left or right when you brake you could have a brake fluid leak.
- This is one of the most visible indications, if you feel that your pedal is much easier to press down and goes up more slowly, it is very likely that you have a loss of pressure in your brake system.
- More obvious, but if you find brake fluid on one of these elements you are bound to have a leak since this circuit is supposed to be closed.
How to resolve a brake fluid leak on Jeep Wrangler?
The only solution when you experience a brake fluid leak on your Jeep Wrangler is to go to your mechanic. If it is light, check your level and drive carefully to the mechanic, if it is too big don’t drive and have your motor vehicle towed. A general breakdown of your brake system will result in an accident. You can, nevertheless, make a few regular checks to limit the risks:
- check the brake fluid level frequently.
- Purge your brakes every two years or 40, 000 miles.
- Replace the brake fluid if you feel the brakes on your Jeep Wrangler become “soft”.
In the event that you have any additional questions about the Jeep Wrangler, do not hesitate to consult our Jeep Wrangler category.
