Certain components of your car are necessary to its correct performance, and to go further, important to your security and that of other users. Your braking system is one of them, and if there’s one thing that must be in good operating conditions, it’s this one. When you begin to have brake complications you need to manage it right away, that’s why our team has posted this guideline on brake fluid leaks on Audi Q3 to help you solve this difficulty in the right way and deal with it fairly quickly. To do this, we will first see the purpose of brake fluid, then, what causes a brake fluid leak on your Audi Q3 , and at last, how to remedy such a leak.
What is the purpose of brake fluid on a Audi Q3?
So we start our content by fairly quickly detailing the purpose of this famous brake fluid in the braking system of your Audi Q3. To figure out, a brake system functions with a closed hydraulic circuit, that is to say that you will have rigid hoses filled with brake fluid that are pressurized by the master cylinder, and when you press your brake pedal, your brake fluid will be pressurized and will actuate your brake calipers so that they pinch the brake pads on your discs. It is consequently vital that you always have the right level of brake fluid on your Audi Q3, if you don’t know how to conduct this manipulation, seek advice from our content on this subject.
Causes of a brake fluid leak on your Audi Q3
We now proceed to a more important part to help you figure out why you have a brake fluid leak on your Audi Q3 .
What causes a brake fluid leak on a Audi Q3?
First, we’ll explain the different possible roots of the leak of your Audi Q3. Here are the ones down below:
- A damaged brake hose: It’s one of the most general motives, one of the brake hoses has been cut and you lose brake fluid and pressure through this hole.
- A defective master cylinder on Audi Q3 can lead to leaks on its different entries or exits.
- Most of the time this occurs when a brake drain has been done lately, and it is often not tightened correctly.
- Wheel cylinder: Only present on drum brakes, this part can leak and bring about an imbalance in the braking.
How to notice a brake fluid leak on Audi Q3?
We will now give you the different recommendations and symptoms to interpret to check that you have a brake fluid leak on your Audi Q3 , locate them down below:
- If the ABS warning light of your Audi Q3 is on , you have to check immediately the state of your circuit, do not think twice to seek advice from our dedicated content to have all the steps to conduct.
- If your Audi Q3 pulls to the left or right when you brake you may possibly have a brake fluid leak.
- This is one of the most noticeable symptoms, if you feel that your pedal is much easier to press down and goes up more slowly, it is very likely that you have a loss of pressure in your brake system.
- More logical, but if you locate brake fluid on one of these elements you are bound to have a leak since this circuit is supposed to be closed.
How to correct a brake fluid leak on Audi Q3?
The only solution when you experience a brake fluid leak on your Audi Q3 is to go to your garage area. If it is light, verify your level and drive carefully to the garage area, if it is too big don’t drive and have your car towed. A general breakdown of your brake system will lead to an accident. You can, however, make a few regular checks to limit the risks:
- verify the brake fluid level repeatedly.
- Purge your brakes every two years or 40, 000 miles.
- Change the brake fluid if you feel the brakes on your Audi Q3 become “soft”.
If you have any further questions about the Audi Q3, do not hesitate to consult our Audi Q3 category.
