Whether it’s to check your car’s fluid levels, do the service, add windshield washer fluid, or change your auto battery, it’s important to maintain your engine unit in good conditions. But, it can occurs that the bonnet of your Peugeot Partner 2 doesn’t want to open, in cases like this, what are your options? This is specifically the concern we will answer today and help you to get out of this annoying situation. To do this, we are going to discover what can be the triggers of a stuck bonnet on your Peugeot Partner 2 and then what are the possibilities to cure this issue.

bonnet-stuck-peugeot-partner-2

Why is my bonnet stuck on my Peugeot Partner 2? What are the possibilities to open my bonnet?

As we explained earlier, we will alternately see the explanations for a bonnet stuck on your Peugeot Partner 2, and what possibilities are available to you to get your bonnet open and repaired.

Broken Peugeot Partner 2 bonnet opening cable

First case scenario. You may not be able to open the bonnet of your Peugeot Partner 2 due to the opening cable. Indeed, with wear and tear, or because of a failure, the cable that goes from your passenger compartment to your engine may fall apart after some time or get stuck in the shell that protects it. Despite the fact this is quite uncommon on newer automobiles, it is not improbable that you could be the victim of this issue, specifically when there is extra humidity in the region where you use your Peugeot Partner 2. If this is the case, there are few solutions available to you and going to your auto mechanic appears to be the most simple and most practical solution. You will have to remove the front grille of your Peugeot Partner 2 to access the lock on your stuck bonnet. Using a large flat screwdriver you will be able to open your car’s bonnet lock by exerting a force on the lock to release it from the spring. Once open, you can try to locate the broken portion of the bonnet cable of your Peugeot Partner 2, remove it from the passenger compartment and engine compartment side and swap it.

How to open the bonnet of my Peugeot Partner 2, even if I have a twisted opening lever?

Second situation which can provoke a bonnet stuck on Peugeot Partner 2. It is this time at the level of the secondary lever which is used to complete the procedure of opening the cover of your car. After some time, this lever may break or twist, and thus prevent you from completing the opening of your engine compartment. You should still be able to open the bonnet from inside your car, but not fully open it. In this situation, a solution is to use multi-function clamps and in the gap between the hood and the grille, grab the rest of the lever or the untwisted part of your lever and pull it with strength. This will open the locked hood of your Peugeot Partner 2. Then if it is twisted, try to straighten it with your pliers. Or swap it with a new one.

Play in the cable to open the stuck bonnet of your Peugeot Partner 2

.
Before last cause of a bonnet stuck on Peugeot Partner 2, you may facing a cable that is starting to have some play. Indeed, the bonnet opening mechanism of your car is equipped with a cable that goes from the passenger compartment of your Peugeot Partner 2 to the opening locker. This cable may become loose after some time. To remedy this issue permanently, there is only one option, replace the hood opening cable of your Peugeot Partner 2. However, you will need a one-off solution in order to be able to open the cover of your car, you will have to request a friend or relative to help you. Position the person at the front of your Peugeot Partner 2 who holds the lever down as if they wanted to finish opening the bonnet. And position yourself in the passenger compartment to pull the hood release handle on your car. If this doesn’t work, you can always try to do as in the case of a broken cable with a pair of clamps. Otherwise go to your mechanic.

Bonnet of my Peugeot Partner 2 stuck

.
Finally, the last circumstance is when the bonnet gets stuck when the passenger compartment handle is operated. In this instance, to unlock the hood of your Peugeot Partner 2, position somebody at the front of your car. And whoever presses moderately on the bonnet of the Peugeot Partner 2, it will have the consequence of releasing some play so that the lock will be unlocked when you activate the interior handle.

In the event that you have any further questions about the Peugeot Partner 2, do not hesitate to consult our Peugeot Partner 2 category.