Some specific components of your Toyota Tacoma are fundamental, whether for your security or that of other drivers, making certain all these components are in good working order is part of your legal and moral obligations. Today, we are going to talk about one of these components, your vehicle’s signals, the turn signals. In fact, you may have a blinker problem on Toyota Tacoma, whether it’s because they’re burned out, they make a strange noise, or whatever, we’re going to try to address your worries today so that you can get back on the road with assurance. To accomplish this, we will discover one after the other various blinker concerns on Toyota Tacoma and the solutions to resolve them.


The various blinker problems on Toyota Tacoma and their solutions

We will consequently produce our article according to the type of blinker problem you are encountering on your Toyota Tacoma. You should know that the turn signals are the only components that allow other road users to know your changes in direction, so it is imperative that they are in good working order.

Blinker problem that does not flash on one side on Toyota Tacoma

If you are in the circumstance in which, when you turn on your blinkers on the left or right side of your Toyota Tacoma they do not light up while on the other side everything works normally. In this circumstance it may be that both of your blinker bulbs are burnt out, first step for you to verify the condition of your blinker bulbs, check out our article on changing the indicator bulb on Toyota Tacoma if you don’t know how to do this technique. Keep in mind to verify the condition of the bulb socket, it may be oxidized and the electrical contact may be bad. If after checking the bulbs of the blinkers of your Toyota Tacoma are not burnt out, you will have to remove the comodo of your turn indicators to verify that there is no false contact when you switch it on the problematic side.

Problem no blinker lights on Toyota Tacoma

Second blinker problem you may experience on Toyota Tacoma, none of your flashers light up. If you are in this circumstance there is a good chance that it is an electrical problem that is the trigger of the turn signal failure. You will have to verify the turn signal fuse on your Toyota Tacoma, please take a look at our article to locate it easily. Most frequently your fuse is blown, in any other case it could be the fuse relay that is producing the problem. At last, if your fuses and relays are in good condition, verify that the flasher comodo is well powered.

Problem a blinker doesn’t light up on Toyota Tacoma

Now the most regular case of blinker problems on Toyota Tacoma, only one of your blinkers doesn’t work. In this circumstance, the problem is in most cases easy to correct and a change of a burnt-out bulb will be enough to solve it. If this is not enough, bear in mind to check the condition of the bulb socket which could provoke a bad electrical contact and thus prevent the bulb from lighting up.

Blinker problem that lights up abnormally on Toyota Tacoma

To finish , the last problem you may experience is that the turn indicators of your Toyota Tacoma make a different noise when you turn them on or that they work abnormally. Two cases, or you have a short circuit somewhere in your electrical installation or, your turn indicator unit is faulty.


As seen sooner on this page, flashing lights are very important security components on your Toyota Tacoma, you must always ensure that that they are working correctly. No matter what the cause of the flasher problem is, it must be fixed as quickly as possible because accidents happen fairly quickly and whether it’s a simple fender bender or something more serious, you are bound to be at fault.

If perhaps you have any further questions about the Toyota Tacoma, do not hesitate to consult our Toyota Tacoma category.