Certain elements of your Toyota Sequoia are vital, whether for your safety or that of other users, making sure all these elements are in good working order is part of your legal and moral duties. On this page, we are going to discuss one of these elements, your vehicle’s signals, the turn signals. In truth, you may have a blinker problem on Toyota Sequoia, whether it’s because they’re burned out, they produce an uncommon noise, or whatever, we’re going to try to address your concerns today so that you can get back on the road with secure feeling. To achieve this, we will discover one by one several blinker problems on Toyota Sequoia and the answers to solve them.


The various blinker problems on Toyota Sequoia and their solutions

We will consequently compose our guideline depending to the type of blinker issue you are being confronted with on your Toyota Sequoia. You should know that the turn signals are the only elements that allow other road users to know your changes in direction, so it is very important that they are in good working order.

Blinker problem that does not flash on one side on Toyota Sequoia

If you are in the situation where, when you turn on your blinkers on the left or right side of your Toyota Sequoia they do not light up while on the other side everything operates normally. In this situation it may be that both of your blinker bulbs are burnt out, first step for you to verify the condition of your blinker bulbs, take a look at our guideline on changing the indicator bulb on Toyota Sequoia if you don’t know how to do this technique. Keep in mind to verify the condition of the bulb socket, it may be oxidized and the electrical contact may be bad. If after looking at the bulbs of the blinkers of your Toyota Sequoia are not burnt out, you will have to take off the comodo of your turn indicators to verify that there is no false contact when you switch it on the troublesome side.

Problem no blinker lights on Toyota Sequoia

Second blinker problem you may experience on Toyota Sequoia, none of your flashers light up. If you are in this situation there is a good chance that it is an electrical issue that is the cause of the turn signal incapacity. You will have to verify the turn signal fuse on your Toyota Sequoia, please take a look at our guideline to locate it quickly. In most instances your fuse is blown, in any other case it could be the fuse relay that is leading to the issue. Finally, if your fuses and relays are in good condition, verify that the flasher comodo is well powered.

Problem a blinker doesn’t light up on Toyota Sequoia

Now the most common case of blinker problems on Toyota Sequoia, only one of your blinkers doesn’t work. In this situation, the issue is in most cases basic to fix and a change of a burnt-out bulb will be enough to solve it. If this is not enough, bear in mind to examine the state of the bulb socket which could cause a bad electrical contact and thus prevent the bulb from lighting up.

Blinker problem that lights up atypically on Toyota Sequoia

To finish , the last issue you may experience is that the turn indicators of your Toyota Sequoia make a different noise when you turn them on or that they work abnormally. Two cases, or you have a short circuit somewhere in your electrical installation or, your turn indicator unit is malfunctioning.


As seen before in this article, flashing lights are important safety elements on your Toyota Sequoia, you must constantly be sure that they are functioning properly. No matter what the cause of the flasher issue is, it must be cured as soon as possible because accidents happen fairly quickly and whether it’s a simple fender bender or something more serious, you are bound to be at fault.

If you wish more tutorials on the Toyota Sequoia, go to our Toyota Sequoia category.