Specific elements of your Peugeot 106 are vital, whether for your safety or that of other users, being sure that all these elements are operating properly is part of your legal and moral responsibilities. On this page, we are going to discuss one of these elements, your vehicle’s signals, the turn signals. In truth, you may have a blinker problem on Peugeot 106, whether it’s because they’re burned out, they make a wierd noise, or whatever, we’re going to try to treat your worries today so that you can get back on the road with peace of mind. To do so, we will discover one at a time several blinker concerns on Peugeot 106 and the answers to remedy them.

blinker-problem-peugeot-106

The various blinker problems on Peugeot 106 and their solutions

We will therefore write our guideline depending to the type of blinker trouble you are facing on your Peugeot 106. You should know that the turn signals are the only elements that allow other road users to know your changes in direction, so it is essential that they are in good working order.

Blinker problem that does not flash on one side on Peugeot 106

If you are in the scenario in which, when you turn on your blinkers on the left or right side of your Peugeot 106 they do not light up while on the other side everything functions normally. In this scenario it may be that both of your blinker bulbs are burnt out, first step for you to verify the condition of your blinker bulbs, check out our guideline on changing the indicator bulb on Peugeot 106 if you don’t know how to do this procedure. Bear in mind to verify the condition of the bulb socket, it may be oxidized and the electrical contact may be bad. If after examining the bulbs of the blinkers of your Peugeot 106 are not burnt out, you will have to remove the comodo of your turn indicators to verify that there is no false contact when you switch it on the troublesome side.

Problem no blinker lights on Peugeot 106

Second blinker problem you may encounter on Peugeot 106, none of your flashers light up. If you are in this scenario there is a good chance that it is an electrical trouble that is the trigger of the turn signal troubles. You will have to verify the turn signal fuse on your Peugeot 106, please check out our guideline to find it very easily. Most of the time your fuse is blown, in any other case it could be the fuse relay that is causing the trouble. At last, if your fuses and relays are in good condition, verify that the flasher comodo is well powered.

Problem a blinker doesn’t light up on Peugeot 106

Now the most regular case of blinker problems on Peugeot 106, only one of your blinkers doesn’t work. In this scenario, the trouble is in general basic to solve and a change of a burnt-out bulb will be enough to solve it. If this is not enough, remember to examine the state of the bulb socket which could bring about a bad electrical contact and thus prevent the bulb from lighting up.

Blinker problem that lights up atypically on Peugeot 106

Finally, the last trouble you may encounter is that the turn indicators of your Peugeot 106 make a different noise when you turn them on or that they work randomly. Two cases, or you have a short circuit somewhere in your electrical installation or, your turn indicator unit is faulty.

Conclusion

As seen before on this page, flashing lights are essential safety elements on your Peugeot 106, you must all the time be sure that they are working properly. No matter what the reason of the flasher trouble is, it must be treated as soon as possible because accidents happen quickly and whether it’s a simple fender bender or something more severe, you are bound to be at fault.

If you have any further questions about the Peugeot 106, do not hesitate to consult our Peugeot 106 category.