Specific components of your Mazda 6 are vital, if for your safety or that of other drivers, making sure that all these components are in good working order is part of your legal and moral responsibilities. Today, we are going to discuss one of these components, your vehicle’s signals, the turn signals. In truth, you may have a blinker problem on Mazda 6, whether it’s because they’re burned out, they generate an unusual noise, or whatever, we’re going to try to solve your worries today so that you can get back on the road with peacefulness. To accomplish this, we will discover one by one various blinker trouble on Mazda 6 and the answers to remedy them.


The various blinker problems on Mazda 6 and their solutions

We will consequently create our guideline according to the kind of blinker issue you are encountering on your Mazda 6. You should know that the turn signals are the only components that allow other road users to know your changes in direction, so it is fundamental that they are in good working order.

Blinker problem that does not flash on one side on Mazda 6

If you are in the scenario where, when you turn on your blinkers on the left or right side of your Mazda 6 they do not light up while on the other side everything works properly. In this situation it may be that both of your blinker bulbs are burnt out, first step for you to verify the condition of your blinker bulbs, see our guideline on changing the indicator bulb on Mazda 6 if you don’t know how to do this operation. Bear in mind to verify the condition of the bulb socket, it may be oxidized and the electrical contact may be bad. If after checking the bulbs of the blinkers of your Mazda 6 are not burnt out, you will have to take off the comodo of your turn indicators to verify that there is no false contact when you switch it on the troublesome side.

Problem no blinker lights on Mazda 6

Second blinker problem you may encounter on Mazda 6, none of your flashers light up. If you are in this situation there is a good chance that it is an electrical issue that is the trigger of the turn signal incapacity. You will have to verify the turn signal fuse on your Mazda 6, please check out our guideline to find it easily. In most cases your fuse is blown, in any other case it could be the fuse relay that is producing the issue. Finally, if your fuses and relays are in good condition, verify that the flasher comodo is well powered.

Problem a blinker doesn’t light up on Mazda 6

Now the most regular case of blinker problems on Mazda 6, only one of your blinkers doesn’t work. In this situation, the issue is in most cases basic to solve and a change of a burnt-out bulb will be enough to solve it. If this is not enough, keep in mind to verify the condition of the bulb socket which could generate a bad electrical contact and thus prevent the bulb from lighting up.

Blinker problem that lights up atypically on Mazda 6

Finally, the last issue you may encounter is that the turn indicators of your Mazda 6 make a different noise when you turn them on or that they work randomly. Two situations, or you have a short circuit somewhere in your electrical installation or, your turn indicator unit is malfunctioning.


As seen before in this post, flashing lights are essential safety components on your Mazda 6, you must always be sure that they are functioning properly. No matter what the trigger of the flasher issue is, it must be fixed as soon as possible because accidents happen very fast and whether it’s a simple fender bender or something more severe, you are bound to be at fault.

To get more tips on the Mazda 6, take a look at the Mazda 6 category.