Certain elements of your Mazda 3 are essential, whether for your safety or that of other drivers, making sure that all these elements are in good working order is part of your legal and moral duties. On this page, we are going to look at one of these elements, your vehicle’s turn indicators, the turn signals. In truth, you may have a blinker problem on Mazda 3, whether it’s because they’re burned out, they generate an unfamiliar noise, or whatever, we’re going to try to resolve your concerns today so that you can get back on the road with peacefulness. To do this, we will discover one by one several blinker trouble on Mazda 3 and the answers to resolve them.


The various blinker problems on Mazda 3 and their solutions

We will consequently write our article content according to the sort of blinker issue you are encountering on your Mazda 3. You should know that the turn signals are the only elements that allow other road users to know your changes in direction, so it is important that they are in good working order.

Blinker problem that does not flash on one side on Mazda 3

If you are in the situation where, when you turn on your blinkers on the left or right side of your Mazda 3 they do not light up while on the other side everything functions normally. In this circumstance it may be that both of your blinker bulbs are burnt out, first step for you to examine the condition of your blinker bulbs, see our article content on changing the indicator bulb on Mazda 3 if you don’t know how to do this technique. Remember to examine the condition of the bulb socket, it may be oxidized and the electrical contact may be bad. If after looking at the bulbs of the blinkers of your Mazda 3 are not burnt out, you will have to remove the comodo of your turn indicators to examine that there is no false contact when you switch it on the problematic side.

Problem no blinker lights on Mazda 3

Second blinker problem you may encounter on Mazda 3, none of your flashers light up. If you are in this circumstance there is a good chance that it is an electrical issue that is the origin of the turn signal failure. You will have to examine the turn signal fuse on your Mazda 3, please visit our article content to find it quickly. Most of the time your fuse is blown, in any other case it could be the fuse relay that is causing the issue. At last, if your fuses and relays are in good condition, examine that the flasher comodo is well powered.

Problem a blinker doesn’t light up on Mazda 3

Now the most basic case of blinker problems on Mazda 3, only one of your blinkers doesn’t work. In this circumstance, the issue is in most cases simple to fix and a change of a burnt-out bulb will be enough to solve it. If this is not enough, remember to check the condition of the bulb socket which could bring about a bad electrical contact and thus prevent the bulb from lighting up.

Blinker problem that lights up atypically on Mazda 3

To conclude, the last issue you may encounter is that the turn indicators of your Mazda 3 make a different noise when you turn them on or that they work randomly. Two situations, either you have a short circuit somewhere in your electrical installation or, your turn indicator unit is faulty.


As seen earlier on this page, flashing lights are important safety elements on your Mazda 3, you must always be sure that they are functioning correctly. No matter what the trigger of the flasher issue is, it must be treated as quickly as possible because accidents happen quickly and whether it’s a simple fender bender or something more severe, you are bound to be at fault.

In the event that you have any additional questions about the Mazda 3, do not hesitate to consult our Mazda 3 category.