Specific elements of your Ford Explorer are vital, if for your safety or that of other users, making sure all these elements are operating properly is part of your legal and moral obligations. On this page, we are going to look at one of these elements, your vehicle’s signals, the turn signals. In fact, you may have a blinker problem on Ford Explorer, whether it’s because they’re burned out, they generate a strange noise, or whatever, we’re going to try to resolve your worries today so that you can get back on the road with assurance. To accomplish this, we will discover one by one various blinker trouble on Ford Explorer and the answers to get rid of them.
The various blinker problems on Ford Explorer and their solutions
We will consequently write our guideline depending to the kind of blinker issue you are struggling with on your Ford Explorer. You should know that the turn signals are the only elements that allow other road users to know your changes in direction, so it is very important that they are in good working order.
Blinker problem that does not flash on one side on Ford Explorer
If you are in the circumstance in which, when you turn on your blinkers on the left or right side of your Ford Explorer they do not light up while on the other side everything operates properly. In this situation it may be that both of your blinker bulbs are burnt out, first step for you to check the condition of your blinker bulbs, see our guideline on changing the indicator bulb on Ford Explorer if you don’t know how to do this technique. Remember to check the condition of the bulb socket, it may be oxidized and the electrical contact may be bad. If after examining the bulbs of the blinkers of your Ford Explorer are not burnt out, you will have to remove the comodo of your turn indicators to check that there is no false contact when you switch it on the problematic side.
Problem no blinker lights on Ford Explorer
Second blinker problem you may encounter on Ford Explorer, none of your flashers light up. If you are in this situation there is a good chance that it is an electrical issue that is the origin of the turn signal failure. You will have to check the turn signal fuse on your Ford Explorer, please have a look at our guideline to find it very easily. In most situations your fuse is blown, in any other case it could be the fuse relay that is leading to the issue. Finally, if your fuses and relays are in good condition, check that the flasher comodo is well powered.
Problem a blinker doesn’t light up on Ford Explorer
Now the most regular case of blinker problems on Ford Explorer, only one of your blinkers doesn’t work. In this situation, the issue is usually easy to fix and a change of a burnt-out bulb will be enough to solve it. If this is not enough, bear in mind to examine the condition of the bulb socket which could generate a bad electrical contact and thus prevent the bulb from lighting up.
Blinker problem that lights up atypically on Ford Explorer
Finally, the last issue you may encounter is that the turn indicators of your Ford Explorer make a different noise when you turn them on or that they work abnormally. Two cases, or you have a short circuit somewhere in your electrical installation or, your turn indicator unit is damaged.
Conclusion
As seen earlier on this page, flashing lights are fundamental safety elements on your Ford Explorer, you must always be sure that they are working correctly. No matter what the cause of the flasher issue is, it must be treated as soon as possible because accidents happen very fast and whether it’s a simple fender bender or something more severe, you are bound to be at fault.
If you wish more guides on the Ford Explorer, go to our Ford Explorer category.