Some specific elements of your Fiat 500 X are essential, regardless for your safety or that of other drivers, ensuring that all these elements are operating properly is part of your legal and moral duties. In this article , we are going to focus on one of these elements, your vehicle’s blinkers, the turn signals. In reality, you may have a blinker problem on Fiat 500 X, whether it’s because they’re burned out, they generate an uncommon noise, or whatever, we’re going to try to solve your worries today so that you can get back on the road with peace of mind. To do so, we will discover one by one several blinker trouble on Fiat 500 X and the solutions to get rid of them.

blinker-problem-fiat-500-x

The various blinker problems on Fiat 500 X and their solutions

We will so create our content page according to the type of blinker trouble you are struggling with on your Fiat 500 X. You should know that the turn signals are the only elements that allow other road users to know your changes in direction, so it is very important that they are in good working order.

Blinker problem that does not flash on one side on Fiat 500 X

If you are in the circumstance in which, when you turn on your blinkers on the left or right side of your Fiat 500 X they do not light up while on the other side everything works properly. In this situation it may be that both of your blinker bulbs are burnt out, first step for you to verify the condition of your blinker bulbs, check out our content page on changing the indicator bulb on Fiat 500 X if you don’t know how to do this procedure. Remember to verify the condition of the bulb socket, it may be oxidized and the electrical contact may be bad. If after checking the bulbs of the blinkers of your Fiat 500 X are not burnt out, you will have to remove the comodo of your turn indicators to verify that there is no false contact when you switch it on the troublesome side.

Problem no blinker lights on Fiat 500 X

Second blinker problem you may encounter on Fiat 500 X, none of your flashers light up. If you are in this situation there is a good chance that it is an electrical trouble that is the origin of the turn signal failure. You will have to verify the turn signal fuse on your Fiat 500 X, please check out our content page to locate it easily. In most instances your fuse is blown, in any other case it could be the fuse relay that is generating the trouble. At last, if your fuses and relays are in good condition, verify that the flasher comodo is well powered.

Problem a blinker doesn’t light up on Fiat 500 X

Now the most basic case of blinker problems on Fiat 500 X, only one of your blinkers doesn’t work. In this situation, the trouble is in general simple to correct and a change of a burnt-out bulb will be enough to solve it. If this is not enough, bear in mind to examine the state of the bulb socket which could trigger a bad electrical contact and thus prevent the bulb from lighting up.

Blinker problem that lights up uncommonly on Fiat 500 X

To conclude, the last trouble you may encounter is that the turn indicators of your Fiat 500 X make a different noise when you turn them on or that they work abnormally. Two situations, either you have a short circuit somewhere in your electrical installation or, your turn indicator unit is defective.

Conclusion

As seen before on this page, flashing lights are very important safety elements on your Fiat 500 X, you must always ensure that they are working correctly. No matter what the trigger of the flasher trouble is, it must be cured as soon as possible because accidents happen very fast and whether it’s a simple fender bender or something more severe, you are bound to be at fault.

To discover more tips on the Fiat 500 X, take a look at the Fiat 500 X category.