Some specific components of your Dodge Nitro are fundamental, if for your safety or that of other individuals, making certain all these components are operating properly is part of your legal and moral duties. On this page, we are going to look at one of these components, your vehicle’s blinkers, the turn signals. In truth, you may have a blinker problem on Dodge Nitro, whether it’s because they’re burned out, they generate a strange noise, or whatever, we’re going to try to solve your concerns today so that you can get back on the road with peacefulness. To achieve this, we will discover one at a time various blinker problems on Dodge Nitro and the solutions to get rid of them.


The various blinker problems on Dodge Nitro and their solutions

We will therefore produce our article depending to the form of blinker trouble you are encountering on your Dodge Nitro. You should know that the turn signals are the only components that allow other road users to know your changes in direction, so it is essential that they are in good working order.

Blinker problem that does not flash on one side on Dodge Nitro

If you are in the situation where, when you turn on your blinkers on the left or right side of your Dodge Nitro they do not light up while on the other side everything operates normally. In this scenario it may be that both of your blinker bulbs are burnt out, first step for you to examine the condition of your blinker bulbs, check out our article on changing the indicator bulb on Dodge Nitro if you don’t know how to do this operation. Remember to examine the condition of the bulb socket, it may be oxidized and the electrical contact may be bad. If after checking the bulbs of the blinkers of your Dodge Nitro are not burnt out, you will have to remove the comodo of your turn indicators to examine that there is no false contact when you switch it on the troublesome side.

Problem no blinker lights on Dodge Nitro

Second blinker problem you may experience on Dodge Nitro, none of your flashers light up. If you are in this scenario there is a good chance that it is an electrical trouble that is the cause of the turn signal failure. You will have to examine the turn signal fuse on your Dodge Nitro, please take a look at our article to locate it very easily. In most cases your fuse is blown, in any other case it could be the fuse relay that is producing the trouble. At last, if your fuses and relays are in good condition, examine that the flasher comodo is well powered.

Problem a blinker doesn’t light up on Dodge Nitro

Now the most regular case of blinker problems on Dodge Nitro, only one of your blinkers doesn’t work. In this scenario, the trouble is generally simple to correct and a change of a burnt-out bulb will be enough to solve it. If this is not enough, keep in mind to verify the condition of the bulb socket which could bring about a bad electrical contact and thus prevent the bulb from lighting up.

Blinker problem that lights up uncommonly on Dodge Nitro

To finish , the last trouble you may experience is that the turn indicators of your Dodge Nitro make a different noise when you turn them on or that they work abnormally. Two cases, either you have a short circuit somewhere in your electrical installation or, your turn indicator unit is faulty.


As seen sooner on this page, flashing lights are essential safety components on your Dodge Nitro, you must always make certain that they are functioning properly. No matter what the reason of the flasher trouble is, it must be fixed as quickly as possible because accidents happen very fast and whether it’s a simple fender bender or something more serious, you are bound to be at fault.

If you have any additional questions about the Dodge Nitro, do not hesitate to consult our Dodge Nitro category.