Some parts of your Chevrolet Trax are essential, if for your safety or that of other users, making sure that all these parts are operating properly is part of your legal and moral responsibilities. In this article , we are going to focus on one of these parts, your vehicle’s turn indicators, the turn signals. In truth, you may have a blinker problem on Chevrolet Trax, whether it’s because they’re burned out, they produce an unfamiliar noise, or whatever, we’re going to try to resolve your worries today so that you can get back on the road with secure feeling. To achieve this, we will discover one after the other different blinker concerns on Chevrolet Trax and the solutions to fix them.


The various blinker problems on Chevrolet Trax and their solutions

We will consequently compose our article content depending to the kind of blinker issue you are struggling with on your Chevrolet Trax. You should know that the turn signals are the only parts that allow other road users to know your changes in direction, so it is essential that they are in good working order.

Blinker problem that does not flash on one side on Chevrolet Trax

If you are in the circumstance in which, when you turn on your blinkers on the left or right side of your Chevrolet Trax they do not light up while on the other side everything operates normally. In this scenario it may be that both of your blinker bulbs are burnt out, first step for you to examine the state of your blinker bulbs, look at our article content on changing the indicator bulb on Chevrolet Trax if you don’t know how to do this technique. Keep in mind to examine the condition of the bulb socket, it may be oxidized and the electrical contact may be bad. If after looking at the bulbs of the blinkers of your Chevrolet Trax are not burnt out, you will have to take off the comodo of your turn indicators to examine that there is no false contact when you switch it on the troublesome side.

Problem no blinker lights on Chevrolet Trax

Second blinker problem you may experience on Chevrolet Trax, none of your flashers light up. If you are in this scenario there is a good chance that it is an electrical issue that is the origin of the turn signal incapacity. You will have to examine the turn signal fuse on your Chevrolet Trax, please go to our article content to locate it quickly. In most situations your fuse is blown, otherwise it could be the fuse relay that is leading to the issue. At last, if your fuses and relays are in good condition, examine that the flasher comodo is well powered.

Problem a blinker doesn’t light up on Chevrolet Trax

Now the most common case of blinker problems on Chevrolet Trax, only one of your blinkers doesn’t work. In this scenario, the issue is usually easy to solve and a change of a burnt-out bulb will be enough to solve it. If this is not enough, remember to examine the condition of the bulb socket which could cause a bad electrical contact and thus prevent the bulb from lighting up.

Blinker problem that lights up abnormally on Chevrolet Trax

Finally, the last issue you may experience is that the turn indicators of your Chevrolet Trax make a different noise when you turn them on or that they work abnormally. Two cases, either you have a short circuit somewhere in your electrical installation or, your turn indicator unit is damaged.


As seen earlier in this post, flashing lights are important safety parts on your Chevrolet Trax, you must constantly make sure that they are operating effectively. No matter what the reason of the flasher issue is, it must be fixed as soon as possible because accidents happen quickly and whether it’s a simple fender bender or something more significant, you are bound to be at fault.

If you wish more tutorials on the Chevrolet Trax, go to our Chevrolet Trax category.