Specific elements of your Chevrolet Equinox are fundamental, whether for your safety or that of other individuals, making certain all these elements are operating properly is part of your legal and moral obligations. On this page, we are going to speak about one of these elements, your vehicle’s turn indicators, the turn signals. In reality, you may have a blinker problem on Chevrolet Equinox, whether it’s because they’re burned out, they make an unusual noise, or whatever, we’re going to try to resolve your concerns today so that you can get back on the road with peacefulness. To achieve this, we will discover one at a time different blinker trouble on Chevrolet Equinox and the answers to resolve them.
The various blinker problems on Chevrolet Equinox and their solutions
We will therefore produce our article according to the kind of blinker problem you are encountering on your Chevrolet Equinox. You should know that the turn signals are the only elements that allow other road users to know your changes in direction, so it is important that they are in good working order.
Blinker problem that does not flash on one side on Chevrolet Equinox
If you are in the case where, when you turn on your blinkers on the left or right side of your Chevrolet Equinox they do not light up while on the other side everything operates properly. In this scenario it may be that both of your blinker bulbs are burnt out, first step for you to check the condition of your blinker bulbs, read our article on changing the indicator bulb on Chevrolet Equinox if you don’t know how to do this process. Remember to check the condition of the bulb socket, it may be oxidized and the electrical contact may be bad. If after looking at the bulbs of the blinkers of your Chevrolet Equinox are not burnt out, you will have to remove the comodo of your turn indicators to check that there is no false contact when you switch it on the problematic side.
Problem no blinker lights on Chevrolet Equinox
Second blinker problem you may experience on Chevrolet Equinox, none of your flashers light up. If you are in this scenario there is a good chance that it is an electrical problem that is the trigger of the turn signal failure. You will have to check the turn signal fuse on your Chevrolet Equinox, please check out our article to locate it very easily. In most instances your fuse is blown, otherwise it could be the fuse relay that is producing the problem. At last, if your fuses and relays are in good condition, check that the flasher comodo is well powered.
Problem a blinker doesn’t light up on Chevrolet Equinox
Now the most regular case of blinker problems on Chevrolet Equinox, only one of your blinkers doesn’t work. In this scenario, the problem is in most cases basic to correct and a change of a burnt-out bulb will be enough to solve it. If this is not enough, keep in mind to examine the condition of the bulb socket which could cause a bad electrical contact and thus prevent the bulb from lighting up.
Blinker problem that lights up uncommonly on Chevrolet Equinox
To conclude, the last problem you may experience is that the turn indicators of your Chevrolet Equinox make a different noise when you turn them on or that they work abnormally. Two cases, either you have a short circuit somewhere in your electrical installation or, your turn indicator unit is damaged.
Conclusion
As seen before in this post, flashing lights are fundamental safety elements on your Chevrolet Equinox, you must always make sure that they are functioning properly. No matter what the reason of the flasher problem is, it must be treated as quickly as possible because accidents happen quickly and whether it’s a simple fender bender or something more severe, you are bound to be at fault.
If you need more guides on the Chevrolet Equinox, go to our Chevrolet Equinox category.
