Specific parts of your Audi S3 are vital, if for your security or that of other drivers, making sure that all these parts are operating properly is part of your legal and moral duties. Today, we are going to speak about one of these parts, your vehicle’s blinkers, the turn signals. In truth, you may have a blinker problem on Audi S3, whether it’s because they’re burned out, they produce an uncommon noise, or whatever, we’re going to try to treat your worries today so that you can get back on the road with assurance. For this, we will discover one after the other different blinker problems on Audi S3 and the solutions to solve them.
The various blinker problems on Audi S3 and their solutions
We will therefore create our guideline depending to the type of blinker problem you are struggling with on your Audi S3. You should know that the turn signals are the only parts that allow other road users to know your changes in direction, so it is necessary that they are in good working order.
Blinker problem that does not flash on one side on Audi S3
If you are in the circumstance in which, when you turn on your blinkers on the left or right side of your Audi S3 they do not light up while on the other side everything functions normally. In this scenario it may be that both of your blinker bulbs are burnt out, first step for you to verify the condition of your blinker bulbs, check out our guideline on changing the indicator bulb on Audi S3 if you don’t know how to do this procedure. Remember to verify the condition of the bulb socket, it may be oxidized and the electrical contact may be bad. If after looking at the bulbs of the blinkers of your Audi S3 are not burnt out, you will have to remove the comodo of your turn indicators to verify that there is no false contact when you switch it on the troublesome side.
Problem no blinker lights on Audi S3
Second blinker problem you may experience on Audi S3, none of your flashers light up. If you are in this scenario there is a good chance that it is an electrical problem that is the cause of the turn signal incapacity. You will have to verify the turn signal fuse on your Audi S3, please read our guideline to find it easily. In most situations your fuse is blown, otherwise it could be the fuse relay that is producing the problem. At last, if your fuses and relays are in good condition, verify that the flasher comodo is well powered.
Problem a blinker doesn’t light up on Audi S3
Now the most general case of blinker problems on Audi S3, only one of your blinkers doesn’t work. In this scenario, the problem is in general basic to fix and a change of a burnt-out bulb will be enough to solve it. If this is not enough, keep in mind to check the state of the bulb socket which could generate a bad electrical contact and thus prevent the bulb from lighting up.
Blinker problem that lights up abnormally on Audi S3
Finally, the last problem you may experience is that the turn indicators of your Audi S3 make a different noise when you turn them on or that they work randomly. Two cases, or you have a short circuit somewhere in your electrical installation or, your turn indicator unit is damaged.
Conclusion
As seen previously on this page, flashing lights are necessary security parts on your Audi S3, you must constantly be certain that they are functioning properly. No matter what the cause of the flasher problem is, it must be fixed as quickly as possible because accidents happen fairly quickly and whether it’s a simple fender bender or something more serious, you are bound to be at fault.
If you have any additional questions about the Audi S3, do not hesitate to consult our Audi S3 category.
