Do you have the perception of a power drop without any rational explanation, and all this comes about in an unforeseen or usual way? Maybe it’s because your Audi S4 is going to limp mode . The fact is, the safety mode can be activated on a motor vehicle for a number of reasons and the activation of this mode will set the engine’s performance, often causing a momentary or irreversible loss of power from your Audi S4 until you resolve the trouble. Our editors wanted to produce this guide so that you can fix this concern, which is very embarrassing and can be dangerous for you and the rest of the drivers. In order to resolve these problems, we will focus on the limp mode of your Audi S4. And secondly, what are the reasons why your Audi S4 goes into safety mode?

limp-mode-audi-s4

Audi S4 THAT GOES TO limp mode: WHAT IS IT?

Let’s start our content with the definition of your Audi S4 that goes to limp mode . You most likely won’t have any info about the fact that this mode has been turned on and you will just experience the outcomes. Usually the clues of a safety mode on your Audi S4 will be that you will perceive an identifiable loss of power, you should not be able to exceed 3000 rpm which makes the use of your Audi S4 more than complicated. Furthermore to the power loss, you may have an amber warning light on your speedometer which will appear on the display to recommend that you go to your auto technician to deal with the trouble as fairly quickly as possible. In reality, via your vehicle’s ECU and the various sensors that constantly monitor the procedure of your engine, your Audi S4 that goes to safety is in reality a sort of electronic flange of your engine. Nevertheless, you must be concerned about this fairly quickly because it most likely hides a concern that needs to be handled, nevertheless, especially over time, certain components such as the EGR valve, the catalytic converter or the particle filter will become clogged and will age much more fairly quickly. In some situations, simply turning your Audi S4 off and on again will be enough to turn off the safety mode, in other cases the original concern must be resolved to return to regular behaviour.

Why is my Audi S4 going into limp mode?

Now we’re going to detail the reasons why your Audi S4 is on limp mode. First of all you can easily check whether this is the circumstance by using your diagnostic plug and Audi S4reading the fault codes of your Audi S4. Please have a check out our dedicated content page which explains you how to use these tools and interpret the fault codes of your Audi S4 yourself. You should discover a fault code displayed because of an engine component. Based on the finish of your motor vehicle the on-board computer will as well tell you that you are in safety mode. We will then discover most of the parts that can make your Audi S4 safe.

  • Turbo: A defective turbo will instantly inform your computer and make your motor vehicle safe.
  • The EGR valve: If your car is ever used in a really quiet technique or just for short trips at low speed, it will often clog up and cause the safety mode to be activated.
  • The Particle Filter: A component famous for the problems it triggers, in the event that your PAP is clogged, you will be subject to a safety shutdown of your Audi S4 just because your engine will not be able to properly exhaust the exhaust gases.
  • The flow meter: Finally, the flow meter is the last of the known motives of an Audi S4 going into safety. In fact, if it doesn’t control the air/fuel mixture properly, your ECU will know the problem instantly.

In the event you have any other worries or questions about your motor vehicle, you can certainly find the remedy in our Audi S4 Guidebook.

To discover more tips on the Audi S4, take a look at the Audi S4 category.