Do you have the sense of a power drop without any reasonable explanation, and all this happens in an unknown or usual way? Maybe it’s because your Audi A6 is going to limp mode . The fact is, the security mode can be activated on a car for a number of causes and the activation of this mode will set the engine’s behavior, often producing a momentary or irreparable loss of power from your Audi A6 until you handle the trouble. Our editors wanted to produce this guidebook so that you can deal with this matter, which is very embarrassing and can be dangerous for you and the rest of the motorists. In order to address these issues, we will concentrate on the limp mode of your Audi A6. And secondly, what are the causes why your Audi A6 goes into security mode?

limp-mode-audi-a6

Audi A6 THAT GOES TO limp mode: WHAT IS IT?

Let’s start our content page with the definition of your Audi A6 that goes to limp mode . You likely won’t have any info about the fact that this mode has been turned on and you will just feel the results. Generally the clues of a safety mode on your Audi A6 will be that you will perceive an identifiable loss of power, you should not be able to exceed 3000 rpm which makes the use of your Audi A6 more than complicated. Furthermore to the power loss, you may have an amber warning light on your speedometer which will appear on the dash to suggest that you go to your auto technician to deal with the trouble as fairly quickly as possible. In reality, via your vehicle’s ECU and the various sensors that constantly monitor the procedure of your engine, your Audi A6 that goes to safety is in reality a kind of electronic flange of your engine. Nevertheless, you must be serious about this fairly quickly because it likely hides a concern that needs to be dealt with, however, specifically over time, certain components such as the EGR valve, the catalytic converter or the particle filter will become clogged and will age much more fairly quickly. In some circumstances, simply turning your Audi A6 off and on again will be enough to turn off the security mode, in other situations the original concern must be solved to return to regular behaviour.

Why is my Audi A6 going into limp mode?

Now we’re going to highlight the causes why your Audi A6 is on limp mode. First of all you can easily check whether this is the circumstance by using your diagnostic plug and Audi A6reading the fault codes of your Audi A6. Please have a check out our dedicated article content which explains you how to use these tools and translate the fault codes of your Audi A6 yourself. You should discover a fault code displayed due to an engine component. Depending on the finish of your car the on-board computer will as well tell you that you are in security mode. We will then see most of the parts that can produce your Audi A6 safe.

  • Turbo: A defective turbo will instantly alert your computer and produce your car safe.
  • The EGR valve: If your car is ever used in a really quiet way or just for short trips at low speed, it will often clog up and trigger the security mode to be activated.
  • The Particle Filter: A component famous for the problems it triggers, in case your PAP is clogged, you will be subject to a safety shutdown of your Audi A6 just because your engine will not be able to effectively exhaust the exhaust gases.
  • The flow meter: At last, the flow meter is the last of the established causes of an Audi A6 going into security. In fact, if it doesn’t control the air/fuel mixture effectively, your ECU will know the problem instantly.

In the event you have any other worries or questions about your car, you can certainly find the remedy in our Audi A6 Guide.

To get more tips on the Audi A6, take a look at the Audi A6 category.