Encountering problems on your vehicle is specially annoying, in addition to the economic side that these problems signify, one must also add the time lost with a non-functional Suzuki Alto and the time spent to identify and remedy the malfunction. Nevertheless, some problems are less significant than others, which is not to say that they do not worry us. On this page we are going to check out a trouble that can occur to everyone, having vibrations at acceleration on Suzuki Alto. This trouble can oftentimes be tricky to perceive but it must be dealt with. We will consequently commence our content page with the origins of these vibrations on Suzuki Alto, then, with the answers you have to reduce or stop these tremors.

acceleration-vibrations-suzuki-alto

Why does my Suzuki Alto emit vibrations when accelerating?

So let’s commence our content page with the origins of this sort of trouble on your car. You should already know that an engine, specifically if it is ancient or if it has been driven a lot, can naturally vibrate without being a trouble behind it. Large diesel engines, specifically those with a lot of torque, can bring about this sort of impression, both at idle and when accelerating.

I feel vibrations on my Suzuki Alto only when accelerating

Let’s take the most interesting circumstance for us in this content page. The simple fact that you experience trembling on your Suzuki Alto during your acceleration phases, in this situation you will have to examine the condition of some parts because several of elements can be at the beginning of these vibrations and whether or not you are unlucky a mix of several of them may also be possible, here is the list of parts that can be involved.

  • Turbo: If the turbo of your Suzuki Alto is defective, it may bring about vibrations that you will come to feel when you accelerate at the moment it is activated.
  • The turbo pressure sensor: This sensor will control the pressure exerted in the turbo of your car, if it fails it may disturb the performance of your turbo and make vibrations that you may experience within the acceleration of your Suzuki Alto.
  • .

  • If the turbo is punctured or injured, the end result will be similar, the power supply of your turbo will be troubled and its performance too. Remember to visually check their condition.

I’m experiencing vibrations on my Suzuki Alto at acceleration and deceleration

We will now concentrate on the case where you experience vibrations on your Suzuki Alto when you are accelerating but also when you are idling. If you only experience vibrations when you are idling on your Suzuki Alto, please browse our content page dedicated to this trouble to solve your problem. If, on the other hand, you detect that your Suzuki Alto vibrates when accelerating but also when it is stopped, here is the list of things to check:

  • EGR valve: In actual fact this valve which handles the return of exhaust gases for pollution standards can become dirty and affect the evacuation of exhaust gases which can bring about Suzuki Alto vibrates when accelerating but also when stopped.
  • Injectors: Your injectors that regulating the fuel/air mixture flow may be dirty or damaged, which will release the wrong amount of mixture and thus prevent your engine block from working effectively, it is even possible that one or more of your cylinders are not running correctly.
  • Fuel Filter: Like the injectors, if the filter is blocked it will not let the fuel pass correctly and therefore affect the performance of your Suzuki Alto, up to the point of generating vibrations during acceleration.

Here are the most important triggers of a Suzuki Alto that vibrates at acceleration

What can I do to stop the vibration when I accelerate on my Suzuki Alto? What can I do?

To finish , in this last section, we will tell you the possibilities available to you to get over these tremors on your car when you accelerate. Here is the best attitude to adopt dependent on the component that is concerned:

  • Turbo: If your turbo starts all these vibrations when you accelerate your Suzuki Alto, it will be good for you to control all the parts connected to it because changing a complete turbo is a big budget and in most cases the trouble does not come directly from the turbo. So remember to take a look at your turbo pressure sensor, your flowmeter, the EGR valve and the hoses of your turbo. Otherwise take your Suzuki Alto to your workshop.
  • EGR valve: The EGR valve has the benefit that it is often easy to access and easy to disassemble/clean. You can always take a look at it and clean it, for this see our content page on cleaning the EGR valve of an Suzuki Alto.
  • Injectors: Injectors are very fragile parts and a few impurities may be enough to affect their performance. Use a fuel additive to simply clean the injectors, if this is not enough you will have to go to a expert.
  • Fuel Filter: If it is the fuel filter, just replace it. A fuel filter doesn’t clean itself, so if it is clogged you will just have to replace it with a new one.

Now you have all the info you need to locate the origin of the vibrations at acceleration on your Suzuki Alto. If you don’t feel able to execute certain procedures don’t hesitate to go to your mechanic.

To find more tips on the Suzuki Alto, take a look at the Suzuki Alto category.