Facing problems on your automobile is really frustrating, moreover the financial side that these complications signify, one must also add the time lost with a non-functional Ram ProMaster and the time spent to establish and remedy the breakdown. However, some problems are less significant than others, which is not to say that they do not get worried us. On this page we are going to check out a problem that can happen to everyone, having vibrations at acceleration on Ram ProMaster. This problem can oftentimes be hard to perceive but it must be looked after. We will so commence our guideline with the sources of these vibrations on Ram ProMaster, then, with the answers you have to reduce or stop these tremors.

acceleration-vibrations-ram-promaster

Why does my Ram ProMaster release vibrations when accelerating?

So let’s commence our guideline with the sources of this form of problem on your car. You should already know that an engine, specifically if it is old or if it has been driven quite a bit, can naturally vibrate without being a problem behind it. Large diesel engines, specifically those with a lot of torque, can trigger this kind of feeling, both at idle and when accelerating.

I feel vibrations on my Ram ProMaster only when accelerating

Let’s take the most interesting case for us in this guideline. The simple fact that you feel trembling on your Ram ProMaster during your acceleration periods, in this circumstance you will have to check the condition of different elements because many of elements can be at the origin of these vibrations and whether or not you are unlucky a combination of several of them may also be possible, here is the list of auto parts that can be involved.

  • Turbo: If the turbo of your Ram ProMaster is defective, it may trigger vibrations that you will suffer when you accelerate at the moment it is turned on.
  • The turbo pressure sensor: This sensor will manage the pressure exerted in the turbo of your car, if it fails it may bother the behavior of your turbo and deliver vibrations that you may come to feel within the acceleration of your Ram ProMaster.

    • .

  • If the turbo is punctured or damaged, the consequence will be similar, the power supply of your turbo will be disturbed and its behavior too. Make sure to visually check their state.

I’m having vibrations on my Ram ProMaster at acceleration and deceleration

We will now look into the scenario where you come to feel vibrations on your Ram ProMaster when you are accelerating but also when you are idling. If you only come to feel vibrations when you are idling on your Ram ProMaster, please seek advice from our guideline focused upon this problem to remedy your problem. If, however, you notice that your Ram ProMaster vibrates when accelerating but also when it is stopped, here is the list of components to check:

  • EGR valve: In actual fact this valve which manages the return of exhaust gases for pollution standards can become dirty and disturb the evacuation of exhaust gases which can trigger Ram ProMaster vibrates when accelerating but also when stopped.
  • Injectors: Your injectors that control the fuel/air mixture flow may be dirty or damaged, which will discharge the wrong amount of mixture and thus prevent your engine block from working properly, it is even possible that one or more of your cylinders are not running effectively.
  • Fuel Filter: Like the injectors, if the filter is clogged it will not let the fuel pass effectively and therefore disturb the operation of your Ram ProMaster, up to the point of generating vibrations during acceleration.

Here are the most important causes of a Ram ProMaster that vibrates at acceleration

What can I do to stop the vibration when I accelerate on my Ram ProMaster? What can I do?

To finish , in this last section, we will give you the possibilities available to you to handle these tremors on your car when you accelerate. Here is the best attitude to adopt depending on the part that is affected:

  • Turbo: If your turbo starts all these vibrations when you accelerate your Ram ProMaster, it will be good for you to control all the auto parts connected to it because changing a complete turbo is a big budget and generally the problem does not come specifically from the turbo. So make sure you check out your turbo pressure sensor, your flowmeter, the EGR valve and the hoses of your turbo. Otherwise take your Ram ProMaster to your mechanic.
  • EGR valve: The EGR valve has the benefit that it is often times easy to access and simple to take apart/clean. You can always examine it and clean it, for this see our guideline on cleaning the EGR valve of an Ram ProMaster.
  • Injectors: Injectors are very sensitive auto parts and a few harmful particles may be enough to disturb their operation. Use a fuel additive to simply clean the injectors, if this is not enough you will have to go to a expert.
  • Fuel Filter: If it is the fuel filter, simply replace it. A fuel filter doesn’t clean itself, so if it is clogged you will simply have to replace it with a new one.

Now you have all the information you need to locate the source of the vibrations at acceleration on your Ram ProMaster. If you don’t feel able to conduct certain procedures don’t hesitate to go to your mechanic.

If perhaps you have any further questions about the Ram ProMaster, do not hesitate to consult our Ram ProMaster category.