Facing problems on your automobile is extremely irritating, in addition to the financial side that these problems signify, one must also add the time lost with a non-operational Peugeot 806 and the time spent to detect and fix the malfunction. Nevertheless, some problems are less severe than others, which is not to say that they do not get worried us. In this article we are going to look at a issue that can affect most of us, feeling vibrations at acceleration on Peugeot 806. This issue can sometimes be hard to perceive but it must be taken care of. We will therefore commence our article with the sources of these vibrations on Peugeot 806, then, with the solutions you have to reduce or stop these tremors.

acceleration-vibrations-peugeot-806

Why does my Peugeot 806 emit vibrations when accelerating?

So let’s commence our article with the sources of this kind of issue on your car. You should already know that an engine, specifically if it is ancient or if it has been driven a lot, can naturally vibrate without being a issue behind it. Large diesel engines, specifically those with a lot of torque, can generate this sort of sensation, both at idle and when accelerating.

I feel vibrations on my Peugeot 806 only when accelerating

Let’s take the most interesting circumstance for us in this article. The fact that you suffer trembling on your Peugeot 806 during your acceleration phases, in this situation you will have to verify the condition of different parts because various of elements can be at the beginning of these vibrations and whether or not you are unfortunate a mix of several of them may also be possible, here is the list of parts that can be concerned.

  • Turbo: If the turbo of your Peugeot 806 is faulty, it may generate vibrations that you will suffer when you accelerate at the moment it is activated.
  • The turbo pressure sensor: This sensor will control the pressure exerted in the turbo of your car, if it fails it may bother the performance of your turbo and bring about vibrations that you may experience during acceleration of your Peugeot 806.

    • .

  • If the turbo is punctured or damaged, the consequence will be alike, the power supply of your turbo will be troubled and its performance too. Make sure to visually check their state.

I’m experiencing vibrations on my Peugeot 806 at acceleration and deceleration

We will now concentrate on the scenario where you experience vibrations on your Peugeot 806 when you are accelerating but also when you are idling. If you only experience vibrations when you are idling on your Peugeot 806, please read our article focused upon this issue to remedy your problem. If, on the other hand, you notice that your Peugeot 806 vibrates when accelerating but also when it is stopped, here is the list of elements to check:

  • EGR valve: In truth this valve which handles the return of exhaust gases for pollution standards can become dirty and disturb the evacuation of exhaust gases which can generate Peugeot 806 vibrates when accelerating but also when stopped.
  • Injectors: Your injectors that control the fuel/air mixture flow may be dirty or damaged, which will generate the wrong amount of mixture and thus prevent your engine block from working properly, it is even possible that one or more of your cylinders are not running effectively.
  • Fuel Filter: Like the injectors, if the filter is clogged it will not let the fuel pass effectively and therefore disturb the operation of your Peugeot 806, up to the point of leading to vibrations during acceleration.

Here are the main triggers of a Peugeot 806 that vibrates at acceleration

What can I do to stop the vibration when I accelerate on my Peugeot 806? What can I do?

To finish , in this last section, we will provide you the possibilities available to you to handle these tremors on your car when you accelerate. Here is the best attitude to adopt according to the part that is involved:

  • Turbo: If your turbo starts all these vibrations when you accelerate your Peugeot 806, it will be good for you to control all the parts connected to it because changing a complete turbo is a big budget and generally the issue does not come precisely from the turbo. So make sure you examine your turbo pressure sensor, your flowmeter, the EGR valve and the hoses of your turbo. Otherwise take your Peugeot 806 to your garage.
  • EGR valve: The EGR valve has the benefit that it is often times easy to access and easy to take apart/clean. You can always check out it and clean it, for this see our article on cleaning the EGR valve of an Peugeot 806.
  • Injectors: Injectors are very fragile parts and a few impurities may be enough to disturb their operation. Use a fuel additive to simply clean the injectors, if this is not enough you will have to go to a specialist.
  • Fuel Filter: If it is the fuel filter, simply change it. A fuel filter doesn’t clean itself, so if it is clogged you will only have to replace it with a new one.

Now you have all the information you need to find the source of the vibrations at acceleration on your Peugeot 806. If you don’t feel able to perform certain procedures don’t hesitate to go to your auto technician.

In the event that you have any further questions about the Peugeot 806, do not hesitate to consult our Peugeot 806 category.