Encountering problems on your car is extremely annoying, furthermore the financial aspect that these problems signify, one must also add the time lost with a non-functional Peugeot 307 Cc and the time spent to establish and repair the breakdown. Nevertheless, some problems are less serious than others, which is not to say that they do not get worried us. On this page we are going to seek out a problem that can occur to many of us, perceiving vibrations at acceleration on Peugeot 307 Cc. This problem can often be tricky to perceive but it must be looked after. We will therefore begin our article with the sources of these vibrations on Peugeot 307 Cc, then, with the solutions you have to reduce or stop these tremors.

acceleration-vibrations-peugeot-307-cc

Why does my Peugeot 307 Cc produce vibrations when accelerating?

So let’s begin our article with the sources of this type of problem on your car. You should already know that an engine, especially if it is ancient or if it has been driven quite a bit, can naturally vibrate without being a problem behind it. Large diesel engines, especially those with a lot of torque, can trigger this form of feeling, both at idle and when accelerating.

I feel vibrations on my Peugeot 307 Cc only when accelerating

Let’s take the most interesting case for us in this article. The fact that you undergo trembling on your Peugeot 307 Cc during your acceleration periods, in this situation you will have to examine the state of some components because various of elements can be at the source of these vibrations and even if you are unfortunate a mix of several of them may also be possible, here is the list of components that can be involved.

  • Turbo: If the turbo of your Peugeot 307 Cc is defective, it may trigger vibrations that you will suffer when you accelerate at the moment it is activated.
  • The turbo pressure sensor: This sensor will control the pressure exerted in the turbo of your car, if it fails it may bother the behavior of your turbo and develop vibrations that you may feel within the acceleration of your Peugeot 307 Cc.

    • .

  • If the turbo is punctured or injured, the result will be similar, the power supply of your turbo will be disrupted and its behavior too. Make sure you visually examine their state.

I’m having vibrations on my Peugeot 307 Cc at acceleration and deceleration

We will now concentrate on the case where you feel vibrations on your Peugeot 307 Cc when you are accelerating but also when you are idling. If you only feel vibrations when you are idling on your Peugeot 307 Cc, please seek advice from our article dedicated to this problem to resolve your problem. If, alternatively, you identify that your Peugeot 307 Cc vibrates when accelerating but also when it is stopped, here is the list of elements to examine:

  • EGR valve: In truth this valve which controls the return of exhaust gases for pollution standards can become dirty and bother the evacuation of exhaust gases which can trigger Peugeot 307 Cc vibrates when accelerating but also when stopped.
  • Injectors: Your injectors that regulating the fuel/air mixture flow may be dirty or damaged, which will release the wrong amount of mixture and thus prevent your engine block from working correctly, it is even possible that one or more of your cylinders are not running properly.
  • Fuel Filter: Like the injectors, if the filter is blocked it will not let the fuel pass properly and therefore bother the performance of your Peugeot 307 Cc, up to the point of leading to vibrations during acceleration.

Here are the main motives of a Peugeot 307 Cc that vibrates at acceleration

What can I do to stop the vibration when I accelerate on my Peugeot 307 Cc? What can I do?

To finish , in this last section, we will provide you the answers available to you to cure these tremors on your car when you accelerate. Here is the best attitude to adopt depending on the part that is affected:

  • Turbo: If your turbo starts all these vibrations when you accelerate your Peugeot 307 Cc, it will be good for you to control all the components associated with it because changing a complete turbo is a big budget and generally the problem does not come precisely from the turbo. So remember to take a look at your turbo pressure sensor, your flowmeter, the EGR valve and the hoses of your turbo. Otherwise take your Peugeot 307 Cc to your garage.
  • EGR valve: The EGR valve has the advantage that it is often times easy to access and easy to disassemble/clean. You can always examine it and clean it, for this see our article on cleaning the EGR valve of an Peugeot 307 Cc.
  • Injectors: Injectors are very delicate components and a few impurities may be enough to bother their performance. Use a fuel additive to simply clean the injectors, if this is not enough you will have to go to a professional.
  • Fuel Filter: If it is the fuel filter, simply replace it. A fuel filter doesn’t clean itself, so if it is clogged you will simply have to replace it with a new one.

Now you have all the info you need to find the source of the vibrations at acceleration on your Peugeot 307 Cc. If you don’t feel able to do certain procedures don’t hesitate to go to your motor mechanic.

If you wish more tutorials on the Peugeot 307 Cc, go to our Peugeot 307 Cc category.