Encountering problems on your car is extremely irritating, in addition to the financial burden that these problems signify, one must also add the time lost with a non-operational Peugeot 3008 and the time spent to identify and remedy the malfunction. On the other hand, some problems are less serious than others, which is not to say that they do not get worried us. Today we are going to look at a problem that can affect all of us, perceiving vibrations at acceleration on Peugeot 3008. This problem can sometimes be complex to perceive but it must be looked after. We will therefore start our article with the origins of these vibrations on Peugeot 3008, then, with the solutions you have to reduce or stop these tremors.

acceleration-vibrations-peugeot-3008

Why does my Peugeot 3008 produce vibrations when accelerating?

So let’s start our article with the origins of this form of problem on your car. You should already know that an engine, specifically if it is ancient or if it has been driven quite a bit, can naturally vibrate without being a problem behind it. Large diesel engines, specifically those with a lot of torque, can provoke this form of sensation, both at idle and when accelerating.

I feel vibrations on my Peugeot 3008 only when accelerating

Let’s take the most interesting circumstance for us in this article. The fact that you come to feel trembling on your Peugeot 3008 during your acceleration periods, in this circumstance you will have to check the state of different components because several of elements can be at the beginning of these vibrations and whether or not you are unlucky a combination of several of them may also be possible, here is the list of components that can be concerned.

  • Turbo: If the turbo of your Peugeot 3008 is faulty, it may provoke vibrations that you will come to feel when you accelerate at the moment it is turned on.
  • The turbo pressure sensor: This sensor will control the pressure exerted in the turbo of your car, if it fails it may bother the behavior of your turbo and create vibrations that you may experience within the acceleration of your Peugeot 3008.

    • .

  • If the turbo is punctured or damaged, the end result will be the same, the power supply of your turbo will be disrupted and its behavior too. Make sure visually examine their state.

I’m experiencing vibrations on my Peugeot 3008 at acceleration and deceleration

We will now concentrate on the situation where you experience vibrations on your Peugeot 3008 when you are accelerating but also when you are idling. If you only experience vibrations when you are idling on your Peugeot 3008, please read our article focused upon this problem to resolve your problem. If, on the other hand, you notice that your Peugeot 3008 vibrates when accelerating but also when it is stopped, here is the list of elements to examine:

  • EGR valve: In reality this valve which controls the return of exhaust gases for pollution standards can become dirty and affect the evacuation of exhaust gases which can provoke Peugeot 3008 vibrates when accelerating but also when stopped.
  • Injectors: Your injectors that regulating the fuel/air mixture flow may be dirty or damaged, which will release the wrong amount of mixture and thus prevent your engine block from working effectively, it is even possible that one or more of your cylinders are not running correctly.
  • Fuel Filter: Like the injectors, if the filter is clogged it will not let the fuel pass correctly and therefore affect the performance of your Peugeot 3008, up to the point of generating vibrations during acceleration.

Here are the most important triggers of a Peugeot 3008 that vibrates at acceleration

What can I do to stop the vibration when I accelerate on my Peugeot 3008? What can I do?

To finish , in this last part, we will give you the solutions available to you to overcome these tremors on your car when you accelerate. Here is the best attitude to adopt in accordance with the component that is involved:

  • Turbo: If your turbo starts all these vibrations when you accelerate your Peugeot 3008, it will be good for you to control all the components attached to it because changing a complete turbo is a big budget and most of the time the problem does not come specifically from the turbo. So be sure to examine your turbo pressure sensor, your flowmeter, the EGR valve and the hoses of your turbo. Otherwise take your Peugeot 3008 to your garage area.
  • EGR valve: The EGR valve has the benefit that it is generally easy to access and easy to take apart/clean. You can always look into it and clean it, for this see our article on cleaning the EGR valve of an Peugeot 3008.
  • Injectors: Injectors are very sensitive components and a few impurities may be enough to affect their performance. Use a fuel additive to simply clean the injectors, if this is not enough you will have to go to a professional.
  • Fuel Filter: If it is the fuel filter, just change it. A fuel filter doesn’t clean itself, so if it is clogged you will basically have to replace it with a new one.

Now you have all the information you need to uncover the source of the vibrations at acceleration on your Peugeot 3008. If you don’t feel able to do certain operations don’t hesitate to go to your motor mechanic.

To get more tips on the Peugeot 3008, take a look at the Peugeot 3008 category.