Encountering problems on your car is particularly irritating, furthermore the economic aspect that these problems represent, one must also add the time lost with a non-operational Mercedes Classe C 2 and the time spent to detect and repair the breakdown. On the other hand, some problems are less severe than others, which is not to say that they do not get worried us. On this page we are going to check out a trouble that can occur to many of us, having vibrations at acceleration on Mercedes Classe C 2. This trouble can oftentimes be tricky to perceive but it must be handled. We will so commence our article with the roots of these vibrations on Mercedes Classe C 2, then, with the solutions you have to reduce or stop these tremors.

acceleration-vibrations-mercedes-classe-c-2

Why does my Mercedes Classe C 2 produce vibrations when accelerating?

So let’s commence our article with the roots of this kind of trouble on your car. You should already know that an engine, especially if it is old or if it has been driven quite a lot, can naturally vibrate without being a trouble behind it. Large diesel engines, especially those with a lot of torque, can cause this kind of discomfort, both at idle and when accelerating.

I feel vibrations on my Mercedes Classe C 2 only when accelerating

Let’s take the most interesting circumstance for us in this article. The simple fact that you experience trembling on your Mercedes Classe C 2 during your acceleration periods, in this circumstance you will have to check the condition of several components because various of elements can be at the starting point of these vibrations and whether or not you are unfortunate a mix of several of them may also be possible, here is the list of auto parts that can be concerned.

  • Turbo: If the turbo of your Mercedes Classe C 2 is defective, it may cause vibrations that you will suffer when you accelerate at the moment it is activated.
  • The turbo pressure sensor: This sensor will control the pressure exerted in the turbo of your car, if it fails it may disrupt the behavior of your turbo and generate vibrations that you may feel during acceleration of your Mercedes Classe C 2.

    • .

  • If the turbo is punctured or damaged, the result will be similar, the power supply of your turbo will be troubled and its behavior too. Make sure you visually verify their state.

I’m getting vibrations on my Mercedes Classe C 2 at acceleration and deceleration

We will now focus on the situation where you feel vibrations on your Mercedes Classe C 2 when you are accelerating but also when you are idling. If you only feel vibrations when you are idling on your Mercedes Classe C 2, please consult our article dedicated to this trouble to resolve your problem. If, alternatively, you realize that your Mercedes Classe C 2 vibrates when accelerating but also when it is stopped, here is the list of elements to verify:

  • EGR valve: In actual fact this valve which handles the return of exhaust gases for pollution standards can become dirty and bother the evacuation of exhaust gases which can cause Mercedes Classe C 2 vibrates when accelerating but also when stopped.
  • Injectors: Your injectors that regulating the fuel/air mixture flow may be dirty or damaged, which will generate the wrong amount of mixture and thus prevent your engine block from working properly, it is even possible that one or more of your cylinders are not running properly.
  • Fuel Filter: Like the injectors, if the filter is clogged it will not let the fuel pass properly and therefore bother the performance of your Mercedes Classe C 2, up to the point of leading to vibrations during acceleration.

Here are the most important triggers of a Mercedes Classe C 2 that vibrates at acceleration

What can I do to stop the vibration when I accelerate on my Mercedes Classe C 2? What can I do?

To finish , in this last part, we will tell you the answers available to you to get over these tremors on your car when you accelerate. Here is the best attitude to adopt in accordance with the component that is affected:

  • Turbo: If your turbo starts all these vibrations when you accelerate your Mercedes Classe C 2, it will be good for you to control all the auto parts associated with it because changing a complete turbo is a big budget and typically the trouble does not come precisely from the turbo. So make sure to examine your turbo pressure sensor, your flowmeter, the EGR valve and the hoses of your turbo. Otherwise take your Mercedes Classe C 2 to your garage.
  • EGR valve: The EGR valve has the advantage that it is more often than not easy to access and easy to disassemble/clean. You can always look into it and clean it, for this see our article on cleaning the EGR valve of an Mercedes Classe C 2.
  • Injectors: Injectors are very sensitive auto parts and a few harmful particles may be enough to bother their performance. Use a fuel additive to simply clean the injectors, if this is not enough you will have to go to a expert.
  • Fuel Filter: If it is the fuel filter, simply change it. A fuel filter doesn’t clean itself, so if it is clogged you will simply have to replace it with a new one.

Now you have all the information you need to find the cause of the vibrations at acceleration on your Mercedes Classe C 2. If you don’t feel able to do certain operations don’t hesitate to go to your technician.

In the event that you have any additional questions about the Mercedes Classe C 2, do not hesitate to consult our Mercedes Classe C 2 category.