Facing problems on your motor vehicle is particularly frustrating, moreover the economic side that these complications represent, one must also add the time lost with a non-operational Jeep Liberty and the time spent to identify and repair the malfunction. However, some problems are less serious than others, which is not to say that they do not worry us. On this page we are going to look into a trouble that can happen to everyone, feeling vibrations at acceleration on Jeep Liberty. This trouble can in some cases be difficult to perceive but it must be taken care of. We will consequently begin our content page with the sources of these vibrations on Jeep Liberty, then, with the answers you have to reduce or stop these tremors.

acceleration-vibrations-jeep-liberty

Why does my Jeep Liberty produce vibrations when accelerating?

So let’s begin our content page with the sources of this sort of trouble on your car. You should already know that an engine, especially if it is ancient or if it has been driven a lot, can naturally vibrate without being a trouble behind it. Large diesel engines, especially those with a lot of torque, can provoke this kind of feeling, both at idle and when accelerating.

I feel vibrations on my Jeep Liberty only when accelerating

Let’s take the most interesting circumstance for us in this content page. The simple fact that you experience trembling on your Jeep Liberty during your acceleration phases, in this scenario you will have to examine the condition of several components because various of elements can be at the origin of these vibrations and regardless if you are unlucky a mix of several of them may also be possible, here is the list of auto parts that can be involved.

  • Turbo: If the turbo of your Jeep Liberty is defective, it may provoke vibrations that you will feel when you accelerate at the moment it is activated.
  • The turbo pressure sensor: This sensor will control the pressure exerted in the turbo of your car, if it fails it may bother the behavior of your turbo and develop vibrations that you may feel within the acceleration of your Jeep Liberty.
  • .

  • If the turbo is punctured or ruined, the consequence will be the same, the power supply of your turbo will be disrupted and its behavior too. Remember to visually examine their condition.

I’m feeling vibrations on my Jeep Liberty at acceleration and deceleration

We will now look into the case where you feel vibrations on your Jeep Liberty when you are accelerating but also when you are idling. If you only feel vibrations when you are idling on your Jeep Liberty, please seek advice from our content page focused on this trouble to fix your problem. If, alternatively, you identify that your Jeep Liberty vibrates when accelerating but also when it is stopped, here is the list of items to examine:

  • EGR valve: In reality this valve which handles the return of exhaust gases for pollution standards can become dirty and disturb the evacuation of exhaust gases which can provoke Jeep Liberty vibrates when accelerating but also when stopped.
  • Injectors: Your injectors that regulating the fuel/air mixture flow may be dirty or damaged, which will generate the wrong amount of mixture and thus prevent your engine block from working properly, it is even possible that one or more of your cylinders are not running effectively.
  • Fuel Filter: Like the injectors, if the filter is blocked it will not let the fuel pass effectively and therefore disturb the performance of your Jeep Liberty, up to the point of generating vibrations during acceleration.

Here are the most important motives of a Jeep Liberty that vibrates at acceleration

What can I do to stop the vibration when I accelerate on my Jeep Liberty? What can I do?

Finally, in this last part, we will give you the possibilities available to you to handle these tremors on your car when you accelerate. Here is the best attitude to adopt dependent on the part that is affected:

  • Turbo: If your turbo starts all these vibrations when you accelerate your Jeep Liberty, it will be good for you to control all the auto parts associated with it because changing a complete turbo is a big budget and most of the time the trouble does not come exclusively from the turbo. So make sure to take a look at your turbo pressure sensor, your flowmeter, the EGR valve and the hoses of your turbo. Otherwise take your Jeep Liberty to your garage.
  • EGR valve: The EGR valve has the advantage that it is quite often easy to access and simple to take apart/clean. You can always examine it and clean it, for this see our content page on cleaning the EGR valve of an Jeep Liberty.
  • Injectors: Injectors are very sensitive auto parts and a few harmful particles may be enough to disturb their performance. Use a fuel additive to simply clean the injectors, if this is not enough you will have to go to a expert.
  • Fuel Filter: If it is the fuel filter, just replace it. A fuel filter doesn’t clean itself, so if it is clogged you will simply have to replace it with a new one.

Now you have all the info you need to find the source of the vibrations at acceleration on your Jeep Liberty. If you don’t feel able to do certain operations don’t hesitate to go to your repair shop.

If you need more guides on the Jeep Liberty, go to our Jeep Liberty category.