Being the target of recurring problems on your car is particularly annoying, moreover the financial side that these problems represent, one must also add the time lost with a non-functional Jeep Grand Cherokee and the time spent to diagnose and remedy the breakdown. However, some problems are less serious than others, which is not to say that they do not get worried us. In this article we are going to look at a trouble that can occur to most of us, perceiving vibrations at acceleration on Jeep Grand Cherokee. This trouble can often be hard to perceive but it must be dealt with. We will consequently begin our guideline with the origins of these vibrations on Jeep Grand Cherokee, then, with the solutions you have to reduce or stop these tremors.

acceleration-vibrations-jeep-grand-cherokee

Why does my Jeep Grand Cherokee emit vibrations when accelerating?

So let’s begin our guideline with the origins of this type of trouble on your car. You should already know that an engine, especially if it is ancient or if it has been driven a lot, can naturally vibrate without being a trouble behind it. Large diesel engines, especially those with a lot of torque, can trigger this sort of sensation, both at idle and when accelerating.

I feel vibrations on my Jeep Grand Cherokee only when accelerating

Let’s take the most interesting circumstance for us in this guideline. The simple fact that you suffer trembling on your Jeep Grand Cherokee during your acceleration periods, in this scenario you will have to verify the condition of several parts because a good number of elements can be at the origin of these vibrations and even if you are unfortunate a mix of several of them may also be possible, here is the list of auto parts that can be involved.

  • Turbo: If the turbo of your Jeep Grand Cherokee is faulty, it may trigger vibrations that you will suffer when you accelerate at the moment it is turned on.
  • The turbo pressure sensor: This sensor will manage the pressure exerted in the turbo of your car, if it fails it may disturb the performance of your turbo and bring about vibrations that you may feel within the acceleration of your Jeep Grand Cherokee.

    • .

  • If the turbo is punctured or injured, the end result will be the same, the power supply of your turbo will be disrupted and its performance too. Be sure to visually examine their condition.

I’m experiencing vibrations on my Jeep Grand Cherokee at acceleration and deceleration

We will now look into the situation where you feel vibrations on your Jeep Grand Cherokee when you are accelerating but also when you are idling. If you only feel vibrations when you are idling on your Jeep Grand Cherokee, please have a look at our guideline dedicated to this trouble to remedy your problem. If, alternatively, you notice that your Jeep Grand Cherokee vibrates when accelerating but also when it is stopped, here is the list of elements to examine:

  • EGR valve: In truth this valve which handles the return of exhaust gases for pollution standards can become dirty and bother the evacuation of exhaust gases which can trigger Jeep Grand Cherokee vibrates when accelerating but also when stopped.
  • Injectors: Your injectors that control the fuel/air mixture flow may be dirty or damaged, which will discharge the wrong amount of mixture and thus prevent your engine block from working properly, it is even possible that one or more of your cylinders are not running correctly.
  • Fuel Filter: Like the injectors, if the filter is clogged it will not let the fuel pass correctly and therefore bother the performance of your Jeep Grand Cherokee, up to the point of causing vibrations during acceleration.

Here are the main motives of a Jeep Grand Cherokee that vibrates at acceleration

What can I do to stop the vibration when I accelerate on my Jeep Grand Cherokee? What can I do?

Finally, in this last section, we will give you the possibilities available to you to handle these tremors on your car when you accelerate. Here is the best attitude to adopt according to the component that is concerned:

  • Turbo: If your turbo starts all these vibrations when you accelerate your Jeep Grand Cherokee, it will be good for you to control all the auto parts associated with it because changing a complete turbo is a big budget and typically the trouble does not come specifically from the turbo. So remember to take a look at your turbo pressure sensor, your flowmeter, the EGR valve and the hoses of your turbo. Otherwise take your Jeep Grand Cherokee to your garage.
  • EGR valve: The EGR valve has the benefit that it is often times easy to access and easy to disassemble/clean. You can always look into it and clean it, for this see our guideline on cleaning the EGR valve of an Jeep Grand Cherokee.
  • Injectors: Injectors are very delicate auto parts and a few harmful particles may be enough to bother their performance. Use a fuel additive to simply clean the injectors, if this is not enough you will have to go to a professional.
  • Fuel Filter: If it is the fuel filter, only change it. A fuel filter doesn’t clean itself, so if it is clogged you will just have to replace it with a new one.

Now you have all the info you need to discover the source of the vibrations at acceleration on your Jeep Grand Cherokee. If you don’t feel able to conduct certain operations don’t hesitate to go to your motor mechanic.

If you have any additional questions about the Jeep Grand Cherokee, do not hesitate to consult our Jeep Grand Cherokee category.