Encountering problems on your car is especially bothersome, moreover the economic side that these complications signify, one must also add the time lost with a non-functional Hyundai Kona and the time spent to diagnose and fix the malfunction. However, some problems are less major than others, which is not to say that they do not stress us. Today we are going to look at a issue that can happen to many of us, feeling vibrations at acceleration on Hyundai Kona. This issue can occasionally be tricky to perceive but it must be handled. We will therefore begin our content with the roots of these vibrations on Hyundai Kona, then, with the answers you have to reduce or stop these tremors.

acceleration-vibrations-hyundai-kona

Why does my Hyundai Kona emit vibrations when accelerating?

So let’s begin our content with the roots of this sort of issue on your car. You should already know that an engine, especially if it is ancient or if it has been driven quite a lot, can naturally vibrate without being a issue behind it. Large diesel engines, especially those with a lot of torque, can provoke this sort of impression, both at idle and when accelerating.

I feel vibrations on my Hyundai Kona only when accelerating

Let’s take the most interesting circumstance for us in this content. The fact that you come to feel trembling on your Hyundai Kona during your acceleration phases, in this situation you will have to verify the state of some elements because many of elements can be at the origin of these vibrations and even if you are unfortunate a combination of several of them may also be possible, here is the list of parts that can be concerned.

  • Turbo: If the turbo of your Hyundai Kona is faulty, it may provoke vibrations that you will come to feel when you accelerate at the moment it is running.
  • The turbo pressure sensor: This sensor will control the pressure exerted in the turbo of your car, if it fails it may bother the behavior of your turbo and bring about vibrations that you may experience within the acceleration of your Hyundai Kona.
  • .

  • If the turbo is punctured or damaged, the end result will be similar, the power supply of your turbo will be disrupted and its behavior too. Make sure to visually examine their state.

I’m getting vibrations on my Hyundai Kona at acceleration and deceleration

We will now concentrate on the situation where you experience vibrations on your Hyundai Kona when you are accelerating but also when you are idling. If you only experience vibrations when you are idling on your Hyundai Kona, please seek advice from our content focused on this issue to solve your problem. If, alternatively, you realize that your Hyundai Kona vibrates when accelerating but also when it is stopped, here is the list of things to examine:

  • EGR valve: In truth this valve which controls the return of exhaust gases for pollution standards can become dirty and bother the evacuation of exhaust gases which can provoke Hyundai Kona vibrates when accelerating but also when stopped.
  • Injectors: Your injectors that regulating the fuel/air mixture flow may be dirty or damaged, which will bring out the wrong amount of mixture and thus prevent your engine block from working correctly, it is even possible that one or more of your cylinders are not running correctly.
  • Fuel Filter: Like the injectors, if the filter is clogged it will not let the fuel pass correctly and therefore bother the operation of your Hyundai Kona, up to the point of generating vibrations during acceleration.

Here are the most important motives of a Hyundai Kona that vibrates at acceleration

What can I do to stop the vibration when I accelerate on my Hyundai Kona? What can I do?

To conclude, in this last part, we will tell you the answers available to you to overcome these tremors on your car when you accelerate. Here is the best attitude to adopt dependent on the part that is affected:

  • Turbo: If your turbo starts all these vibrations when you accelerate your Hyundai Kona, it will be good for you to control all the parts connected to it because changing a complete turbo is a big budget and generally the issue does not come specifically from the turbo. So make sure you take a look at your turbo pressure sensor, your flowmeter, the EGR valve and the hoses of your turbo. Otherwise take your Hyundai Kona to your garage area.
  • EGR valve: The EGR valve has the benefit that it is generally easy to access and easy to disassemble/clean. You can always look into it and clean it, for this see our content on cleaning the EGR valve of an Hyundai Kona.
  • Injectors: Injectors are very delicate parts and a few harmful particles may be enough to bother their operation. Use a fuel additive to simply clean the injectors, if this is not enough you will have to go to a specialist.
  • Fuel Filter: If it is the fuel filter, simply change it. A fuel filter doesn’t clean itself, so if it is clogged you will simply have to replace it with a new one.

Now you have all the info you need to discover the source of the vibrations at acceleration on your Hyundai Kona. If you don’t feel able to conduct certain operations don’t hesitate to go to your auto mechanic.

Whenever you have any further questions about the Hyundai Kona, do not hesitate to consult our Hyundai Kona category.