Facing problems on your vehicle is extremely irritating, in addition to the economic aspect that these problems represent, one must also add the time lost with a non-operational hyundai i10 and the time spent to identify and remedy the breakdown. On the other hand, some problems are less severe than others, which is not to say that they do not stress us. In this article we are going to take a look at a problem that can happen to most of us, perceiving vibrations at acceleration on hyundai i10. This problem can in some cases be difficult to perceive but it must be taken care of. We will therefore start our content with the origins of these vibrations on hyundai i10, then, with the answers you have to reduce or stop these tremors.

acceleration-vibrations-hyundai-i10

Why does my hyundai i10 produce vibrations when accelerating?

So let’s start our content with the origins of this sort of problem on your car. You should already know that an engine, especially if it is ancient or if it has been driven quite a bit, can naturally vibrate without being a problem behind it. Large diesel engines, especially those with a lot of torque, can cause this form of feeling, both at idle and when accelerating.

I feel vibrations on my hyundai i10 only when accelerating

Let’s take the most interesting circumstance for us in this content. The simple fact that you undergo trembling on your hyundai i10 during your acceleration phases, in this circumstance you will have to examine the condition of several elements because many of elements can be at the beginning of these vibrations and even if you are unfortunate a combination of several of them may also be possible, here is the list of auto parts that can be involved.

  • Turbo: If the turbo of your hyundai i10 is faulty, it may cause vibrations that you will come to feel when you accelerate at the moment it is turned on.
  • The turbo pressure sensor: This sensor will control the pressure exerted in the turbo of your car, if it fails it may disturb the behavior of your turbo and generate vibrations that you may come to feel at the time of acceleration of your hyundai i10.

    • .

  • If the turbo is punctured or harmed, the consequence will be alike, the power supply of your turbo will be disrupted and its behavior too. Make sure to visually verify their condition.

I’m feeling vibrations on my hyundai i10 at acceleration and deceleration

We will now concentrate on the situation where you come to feel vibrations on your hyundai i10 when you are accelerating but also when you are idling. If you only come to feel vibrations when you are idling on your hyundai i10, please seek advice from our content focused on this problem to fix your problem. If, however, you detect that your hyundai i10 vibrates when accelerating but also when it is stopped, here is the list of items to verify:

  • EGR valve: In truth this valve which manages the return of exhaust gases for pollution standards can become dirty and disrupt the evacuation of exhaust gases which can cause hyundai i10 vibrates when accelerating but also when stopped.
  • Injectors: Your injectors that control the fuel/air mixture flow may be dirty or damaged, which will discharge the wrong amount of mixture and thus prevent your engine block from working correctly, it is even possible that one or more of your cylinders are not running properly.
  • Fuel Filter: Like the injectors, if the filter is blocked it will not let the fuel pass properly and therefore disrupt the operation of your hyundai i10, up to the point of producing vibrations during acceleration.

Here are the most important triggers of a hyundai i10 that vibrates at acceleration

What can I do to stop the vibration when I accelerate on my hyundai i10? What can I do?

To finish , in this last part, we will give you the possibilities available to you to cure these tremors on your car when you accelerate. Here is the best attitude to adopt in accordance with the component that is involved:

  • Turbo: If your turbo starts all these vibrations when you accelerate your hyundai i10, it will be good for you to control all the auto parts connected to it because changing a complete turbo is a big budget and in most cases the problem does not come precisely from the turbo. So make sure take a look at your turbo pressure sensor, your flowmeter, the EGR valve and the hoses of your turbo. Otherwise take your hyundai i10 to your workshop.
  • EGR valve: The EGR valve has the advantage that it is generally easy to access and simple to take apart/clean. You can always take a look at it and clean it, for this see our content on cleaning the EGR valve of an hyundai i10.
  • Injectors: Injectors are very delicate auto parts and a few impurities may be enough to disrupt their operation. Use a fuel additive to simply clean the injectors, if this is not enough you will have to go to a professional.
  • Fuel Filter: If it is the fuel filter, only change it. A fuel filter doesn’t clean itself, so if it is clogged you will basically have to replace it with a new one.

Now you have all the info you need to uncover the source of the vibrations at acceleration on your hyundai i10. If you don’t feel able to conduct certain operations don’t hesitate to go to your auto mechanic.

In the event that you have any additional questions about the hyundai i10, do not hesitate to consult our hyundai i10 category.