Being the target of recurring problems on your car is extremely irritating, moreover the financial side that these complications represent, one must also add the time lost with a non-functional Fiat Panda 3 and the time spent to detect and repair the malfunction. On the other hand, some problems are less major than others, which is not to say that they do not stress us. In this article we are going to look at a trouble that can occur to all of us, having vibrations at acceleration on Fiat Panda 3. This trouble can occasionally be hard to perceive but it must be looked after. We will consequently start our content page with the origins of these vibrations on Fiat Panda 3, then, with the solutions you have to reduce or stop these tremors.

acceleration-vibrations-fiat-panda-3

Why does my Fiat Panda 3 emit vibrations when accelerating?

So let’s start our content page with the origins of this type of trouble on your car. You should already know that an engine, especially if it is old or if it has been driven quite a bit, can naturally vibrate without being a trouble behind it. Large diesel engines, especially those with a lot of torque, can trigger this form of sensation, both at idle and when accelerating.

I feel vibrations on my Fiat Panda 3 only when accelerating

Let’s take the most interesting case for us in this content page. The fact that you undergo trembling on your Fiat Panda 3 during your acceleration periods, in this scenario you will have to examine the state of different components because a good number of elements can be at the starting point of these vibrations and even if you are unlucky a combination of several of them may also be possible, here is the list of components that can be involved.

  • Turbo: If the turbo of your Fiat Panda 3 is faulty, it may trigger vibrations that you will feel when you accelerate at the moment it is activated.
  • The turbo pressure sensor: This sensor will manage the pressure exerted in the turbo of your car, if it fails it may disturb the behavior of your turbo and deliver vibrations that you may feel during acceleration of your Fiat Panda 3.

    • .

  • If the turbo is punctured or injured, the consequence will be the same, the power supply of your turbo will be troubled and its behavior too. Make sure to visually verify their state.

I’m having vibrations on my Fiat Panda 3 at acceleration and deceleration

We will now look into the case where you feel vibrations on your Fiat Panda 3 when you are accelerating but also when you are idling. If you only feel vibrations when you are idling on your Fiat Panda 3, please browse our content page focused upon this trouble to remedy your problem. If, alternatively, you detect that your Fiat Panda 3 vibrates when accelerating but also when it is stopped, here is the list of components to verify:

  • EGR valve: Indeed this valve which controls the return of exhaust gases for pollution standards can become dirty and disrupt the evacuation of exhaust gases which can trigger Fiat Panda 3 vibrates when accelerating but also when stopped.
  • Injectors: Your injectors that control the fuel/air mixture flow may be dirty or damaged, which will generate the wrong amount of mixture and thus prevent your engine block from working effectively, it is even possible that one or more of your cylinders are not running effectively.
  • Fuel Filter: Like the injectors, if the filter is blocked it will not let the fuel pass effectively and therefore disrupt the performance of your Fiat Panda 3, up to the point of generating vibrations during acceleration.

Here are the most important causes of a Fiat Panda 3 that vibrates at acceleration

What can I do to stop the vibration when I accelerate on my Fiat Panda 3? What can I do?

To finish , in this last section, we will give you the solutions available to you to overcome these tremors on your car when you accelerate. Here is the best attitude to adopt dependent on the component that is concerned:

  • Turbo: If your turbo starts all these vibrations when you accelerate your Fiat Panda 3, it will be good for you to control all the components associated with it because changing a complete turbo is a big budget and typically the trouble does not come precisely from the turbo. So make sure to examine your turbo pressure sensor, your flowmeter, the EGR valve and the hoses of your turbo. Otherwise take your Fiat Panda 3 to your workshop.
  • EGR valve: The EGR valve has the advantage that it is generally easy to access and easy to disassemble/clean. You can always look into it and clean it, for this see our content page on cleaning the EGR valve of an Fiat Panda 3.
  • Injectors: Injectors are very fragile components and a few impurities may be enough to disrupt their performance. Use a fuel additive to simply clean the injectors, if this is not enough you will have to go to a expert.
  • Fuel Filter: If it is the fuel filter, just change it. A fuel filter doesn’t clean itself, so if it is clogged you will simply have to replace it with a new one.

Now you have all the information you need to find the source of the vibrations at acceleration on your Fiat Panda 3. If you don’t feel able to conduct certain operations don’t hesitate to go to your auto mechanic.

In the event that you have any further questions about the Fiat Panda 3, do not hesitate to consult our Fiat Panda 3 category.